HVACR - Metal Duct

Product Categories

Malco Products TSHD Power Shear Drill Attachment For Cutting Metal
TurboShear® – Heavy Duty, Sheet Metal Cutting Attachment

Quickly attaches to the chuck of a minimum 12-volt cordless or an A/C electric drill. A 18 gauge capacity in galvanized sheet metal. Telescoping clamp fits large or small drill housing.

View

Malco TSHD1A Pneumatic Sheet Metal Shear
TurboShear® – Heavy Duty Sheet Metal Cutting, Pneumatic

Use AIR PRESSURE for unstoppable shearing power in heavy sheet metal.

View

New


TSMD Double Cut Sheet Metal Shear Drill Attachment
TurboShear® – Double Cut Drill Attachment

Make your drill a double-cut metal shear. Now you can get double-cut performance in a versatile Malco TurboShear.

View

New


TurboShear® – Double Cut, Pneumatic

Now you can get double-cut performance in a versatile Malco TurboShear Air Tool.

View

Malco's 16 Gauge Sheet Metal Cutter Attachment
TurboShear® – 16 Gauge Metal Cutting Drill Attachment

Makes your power drill a powerful metal-cutting shear, instantly! Superior performance at a fraction of the cost of a dedicated electric power shear.

View

TS1 Malco TurboShear Sheet Metal Cutter
TurboShear®

Quickly attaches to the chuck of a minimum 12-volt cordless or an A/C electric drill. A 20 gauge capacity in galvanized sheet metal.

View

New


Malco C5A2 Sheet Metal Crimping Tool Attachment
TurboCrimper® IMPACT

Quickly makes your impact driver a power crimper for 30-24 ga. (0.41-0.71 mm) round metal duct and (0.31-0.61 mm) stove pipe. The extra power of the TurboCrimper, is five times faster than manual sheet metal crimpers, making your job a lot easier.

View

Malco C5A Turbo Crimper
TurboCrimper®

Use your existing drill to save time and effort crimping sheet metal duct.

View

Malco 5 Blade Sheet Metal Crimper
5-Blade Sheet Metal Crimper

The five blades on the Malco C5R allows maximum crimping power, producing a 1-5/8 inch (41.3 mm) long, shallow, double crimp that replicates factory indentations and ensures a tight fitting, leak-proof connection.

View

Malco C6R Offset 5 Blade Sheet Metal Crimper
5-Blade Crimper – Sheet Metal Pipe, Offset

Offset sheet metal crimper works overhead to downsize round metal duct and create a male connection for joining sections.

View

Malco SC3R Sheet Metal Crimper
3-Blade Crimper – Sheet Metal

Downsizes heavy stove pipe and round metal duct to create a male connection for joining sections.

View

Malco SC1 Single Crimping Tool
Single Crimper

Fast, easy to use and lightweight. Handy lock makes tool pocket sized.

View

New


Malco C-Rhex Reversible Hex Driver
C-RHEX™ Dual-Sided Magnetic Hex Drivers

Exclusive, dual-sided, reversible chuck driver ensures that 1/4 and 5/16-inch magnetic hex drives are always at hand.

View

Zip-In Self Piercing Sheet Metal Screw
Zip-In® Self Piercing Sheet Metal Screws

A unique thread design and quality controlled manufacture spell the Zip-In® difference. A sophisticated heat treat process allows the screw to taper to a fine, sharp point without sacrificing critical tip strength. Rated #1, Zip-in® Screws are the Best Selling Sheet Metal Screw Worldwide.

View

Bit-Tip® – Drill and Tap Screws

Drills its own hole, taps a matching thread and fastens in steel up to .220 thick in less time it takes to drill a pilot hole for other standard sheet metal screws.

View

Drill-in Screws Type A, Single Thread

Type A 5/16 Hex, Sheet Metal Screws

View

Square Pan Head Zip-In® Screws

Zip-in Screws are the best selling sheet metal screws worldwide.

View

Zip-In® Register Screws

Malco’s register screws offer a high quality Zip-In fit while securing registers to walls.

View

Painted Sheet Metal Screws

Available in royal brown, musket bronze, almond, white, classic cream and clay.

View

New


All 4 Sizes if Malco Products Bit Extensions - Impact Grade
Impact Grade Quick-Change Extension Bits

Extensions fit any power drill or 1/4-inch power drive holder. Ball bearing on extensions’ holders provides a positive lock on 1/4-inch hex shank chuck drivers and bits.

View

Malco 6 inch Forged Hand Seamer
Hand Seamers with Forged Jaws

For bending metal and flattening seams, as well as straightening sheet metal or safely gripping and moving metal on the job.

View

S10
Cast Steel Seamer & Tongs

Durable all-cast-steel construction, maneuverable offset and straight designs, versatile deep jaw openings, precise 135 degree bending capabilities and non-marring vinyl-gripped jaw options.

View

Mini-Brake: Portable

Makes bends to 135 degrees in galvanized sheet steel up to 22 gauge (0.86 mm).

View

Mini-Brake: “Pan Style”

Fabricate pans and boxes, flashing and fascia corners, plus large metal duct, and roofing components on the job.

View

Folding Tool: Adjustable

Malco’s No. 9A Adjustable Folding Tool easily folds edges of aluminum siding, trim coil and lighter gauges of sheet metal up to 26 gauge (0.56 mm).

View

Malco 24 inch Folding Tool
Sheet Metal Folding Tool: Fixed Length and Depth

Folding Tool seams are formed from two steel halves, permanently joined together. Handy sight holes assure proper depth alignment.

View

“Gold Standard” Malco Hole Cutters and Cutter Bits

Distinctive gold Bits, Bearings and Pivot Pin signify the longest lasting, fastest cutting, easiest adjusting solution for cutting holes in sheet metal. Up to 20-gauge (1.02 mm) capacity in galvanized steel.

View

Angle Drive Accessory

1:1 Gear Ratio accessory to assist the Hole Cutters in making take-off holes in sheet metal ductwork.

View

New


Malco Products AVM6 EV, Mini Left Cutting Sheet Metal Snip
Aviation “Mini” Snips – Left and Right Cutting Offset

The compact, offset AVsMini easily goes to work in tight spaces where full-size aviation snips are challenged. Offered in both a right and left offset cut.

View

Left Cutting Aviation Sheet Metal Snips
Aviation Snips – AVs

Aviation style sheet metal snips for straight cuts and slightly curved cuts in either direction. Traditional design with forged steel jaws, torsion handle spring and side latch.

View

Malco AV6 Aviation Style Sheet Metal Snips
Aviation Snips: Offset AVs

Aviation style offset sheet metal snips for straight cuts and slightly curved cuts in either direction.

View

Malco AV8 Left Cutting Aviation Style Sheet Metal Snips
Aviation Snips – Left Cutting and Right Cutting Vertical

Left-cutting and right-cutting forged steel jaws are set at a 90-degree angle to allow easy gripping when cutting sheet metal in tight spaces or overhead.

View

Aviation Snips: Max2000®

Max2000 and Max2000 Classic: Standard Left, Right and Combination Cutting Aviation Snips have wide-opening jaws with a serrated lower blade for fast controlled cuts in vinyl plastics, layered metals and seams. Precisely ground blade tips also cut into tight spaces and flush to 90° walls.

View

Aviation Snips: Offset – Max2000®

The Max2000 Offset Aviation Snips are offered in two handle styles, regular Max2000 and Max2000 Classic. Both handles provide superior hardened blade edges for “maximum” cutting life.

View

Aviation Snips: Bulldog – Max2000®

Max2000 bulldog notching and trimming aviation snip with Euro-styled ergonomic handles.

View

Aviation Snips: Double Cut – Max2000®

Max2000 distortion-free, double-cut aviation snip with Euro-styled ergonomic handles.

View

Malco M12N Snips for Vinyl Siding, Sheet Metal, Aluminum
Andy Aluminum Handled Snips 12″

12 inch (31 cm) long aluminum handled snips with heat treated cutlery grade replaceable steel blades.

View

Andy Aluminum Handled Snips 14″

14 inch (36 cm) long aluminum handled snip with heat treated cutlery grade replaceable steel blades.

View

New


Ultra Lightweight Metal Cutting Snips

The ULC10 Ultra Lightweight Metal Cutting Snip offers a light, yet powerful option for cutting aluminum, and 26 to 24 gauge steel.

View

Forged Steel Snips

Forged steel snips for cutting straight, wide curves, and notches. Three types of forged snips from Malco include regular pattern, circular duckbill, and bulldog pattern snips.

View

Hand Notcher – 13/16 Inch and 1 Inch

Model N1R for metal duct corner notches and take-off tabs makes a clean 30° “V” shaped cut in 24-gauge (0.71 mm) galvanized steel. Model N2R for metal duct corner notches makes a clean 1-inch deep “V” shaped cut in 24-gauge (0.71 mm) galvanized or (0.61 mm) mild steel.

View

Hole Punch – Sheet Metal, Vinyl Plastic

Use for edge hole applications in sheet metal or vinyl plastic including metal ductwork and vinyl window extrusions.

View

Snap Lock Punch for Sheet Metal

Raises a projection along edge of metal sheet for locking into rolled edge of sheet to be joined.

View

DS1 Duct Stretcher by Malco Products
Duct Stretcher – Straight and Offset

Use the Duct Stretcher to hold duct in place with one hand while slipping drive cleat in place with other hand. Duct Stretchers available in a straight or offset model.

View

Locking Duct Stretcher

Locking duct stretcher pulls duct sections together and holds them in place while freeing both hands to align and install drive cleats.

View

Sheet Metal Hammers: Riveting

Available in vinyl gripped and leather gripped.

View

Vinyl Gripped Sheet Metal Hammer, Setting
Sheet Metal Hammers: Setting

Available in vinyl gripped and leather gripped.

View

Duct Ripper

Specially angled ground tip easily punctures and rips duct to the desired length starting hole.

View

28 Gauge Dampers

Available with or without handles

View

Damper Regulator Hardware

For use on 24-30 gauge galvanized steel.

View

Hollow Hex Chuck Drivers – Color Coded

Malco precision fit and hardened Hollow Hex Chuck Drivers, with 1/4-inch power insert shanks.

View

Vent Saw

Designed for cutting all types of hard and soft wood, and other non ferrous materials including plywood, composition board and siding.

View

Magnetic Hex Chuck Drivers – Color Coded

Malco precision fit and hardened Magnetic Hex Chuck Drivers, with 1/4-inch power insert shanks.

View

Sheet Metal Double Ender Drill Bits

Two points for twice the life, twice the convenience.

View

Sheet Metal Drill Bits

Sheet metal drills with 135° split point design bite into metal precisely where wanted – will not wander.

View

Carbide Tipped Rotary Percussion Bits

Use in any rotary or rotary percussion drilling device for unexcelled performance in brick, tile, granite, concrete, masonry and other similar hard and dense materials.

View

Jobber Drill Bit Kits

General purpose drills. 118° conventional point angle allows deep drilling in a variety of materials including metal.

View

Step Drills

A unique double flute design assures the penetration of soft or thin materials at the proper speed.

View

Driver Bit Pouch

Fits cordless or corded drills. Durable elastic bands easily loop around motor housing for handy bit storage.

View

Phillips Chuck Drivers

Power drive 1/4-inch hex insert shank fits any electric power drill or 1/4-inch power drive holder.

View

Phillips Insert Bit

Fits any 1/4-inch hex magnetic bit holder.

View

Magnetic Bit Holder

Power drive 1/4-inch hex shank fits any power drill or 1/4-inch power drive holder. Accepts 1/4-inch hex shank insert bits.

View

Hand Riveter: 2IN1

Rivet gun for blind rivets with 1/8 inch thru 3/16 inch mandrels.

View

Hand Riveter: Economy

Lightweight, compact size and slim nose projection allows this riveter to go wherever the work is.

View

Blind Rivets

Malco blind rivets provide a strong, secure connection between 2 or more sheets of material, that will not loosen with vibration.

View

Painted Rivets with Aluminum Rivet and Mandrel

Painted rivets packaged in 100 piece bags.

View

Flexible Lightweight Caulking Gun

Compact design stores in a toolbox.

View

Black Utility Caulking Gun
Utility Caulking Gun

Easy loading and lightweight for smooth, clean operation.

View

Easy Dispensing Caulking Gun

Smooth action with large, comfortable power grip.

View

Professional Square Piston Design Caulking Gun

Heavy duty professional model caulking guns with thumb-activated pressure release.

View

Red Lip Plastic Anchors

Use with wood. sheet metal or lag screws.

View

Scratch Awls

Use to scribe lines on metal, plastic and a variety of other materials. Pierce holes in wood, plastic, leather, – even light gauge metal.

View

Expandable Trammel Points

Two sizes handle a variety of layout applications. The TR42 expands to a big 42” (107 cm) radius. The compact TR18 expands to 18” (46 cm) and stores in most tool bags.

View

Carbide Tipped Scribe

Solid carbide tip for scribing fine lines on hardened steel as well as glass, ceramics, plastics or sheet metal.

View

Adapter for hex power driver
Quick Change Hex Adapter

Fits 3/8-inch or larger power drills. Holder accepts 1/4-inch hex shank chuck drivers and bits.

View

Pocket Sized Sheet Metal Scribe

Scribe commonplace trim lines on galvanized sheet metal quickly and accurately.

View

Adjustable Sheet Metal Scribe

Measure, mark and scribe trim lines on sheet metal in one easy operation. Set desired trim depth on scriber extension and tighten knob.

View

Pin Vise

Use in hand or insert in drill chuck. Pin Vise holds wire gauge drill sizes 61 to 80.

View

Fast adjusting Scribers/Dividers

Accurate and fast adjusting. Two sizes for circles up to 32” (81 cm) and 42” (107 cm). Points are easily resharpened or replaced. Nickel plated steel body.

View

Malco's Deluxe HVAC Starter Kit with 29 pieces showing everything included
Deluxe HVAC Starter Kit – 29 Piece

27 Tools and FREE bags of Zip-in and Bit-Tip Screws kitted in a TB1 Soft-Sided Tool Bag or TBP33 Tool Backpack.

View

16 Piece HVAC Tool Kit showing everything included
HVAC Starter Kit – 16 Piece

14 Tools and FREE bags of Zip-in and Bit-Tip Screws kitted in a TB1 Soft-Sided Tool Bag or TBP33 Tool Backpack.

View

Square Head Chuck Drivers

For driving square head, (Robertson), screws into wood and sheet metal.

View

Duct Holder

For holding ductwork in place. Duct Holders: 1-Pair of clamps with chain.

View

New


Front View of Malco Products TBP33 Tool Backpack
Tool BackPack

Easily organize, protect and transport your tools in a 33-pocket Ballistic Nylon Backpack.

View

Soft Sided Tool Bag

Rugged, heavyweight nylon tool bag organizes large and small tools with ample capacity and multiple interior and exterior pockets.

View

Tote Tray

Heavy duty, crush proof tote trays are great for carrying hand tools and fasteners to the job site.

View

Reciprocating Saw: Metal

Reciprocating saw blade for cutting various forms of metal.

View

Reciprocating Saw: General Purpose

Reciprocating saw blades for general purpose use. Blades capable of cutting in wood with nails, metal under 3/16 inches, non-ferrous metals, plastic fiberglass, and plaster.

View

Precision Multi-Use Combination Squares

Machined head has self aligning zinc drawbolt for easy blade installation.

View

Aluminum Straight Edge Rule

Made from .125 thickness extruded aluminum.

View

Pocket Level

Strong molded plastic frame with pocket clip.

View

Tinner’s Circumference Rules

Standard bench rules with circumference readings for sheet metal work.

View

1" x 16' Magnetic Tip Tape Measure
Magnetic Measuring Tape

Pick the one tape from a choice of three that is ideal for your metalworking needs!

View

New


Writable Magnetic Tape Measure
Writable Magnetic Measuring Tape

Tape measure with writable/erasable case, 1 inch x 25 foot double-sided blade and magnetic tip with four hook points.

View

New


Writable Measuring Tape

Malco 1 inch x 25 foot Measuring Tape features quick-note case and versatile double-sided blade with four hook points.

View

Measuring Tape

Rubber-Clad Housing

View