Fence Installation Essentials

Product Categories

Malco's FP1 Fencing Pliers
Fencing Pliers

For chain link fence. Legendary all-steel fencing pliers design features three serrated jaw areas, three built-in wire cutter locations and a compact, rounded and tapered nose. 8-in (203 mm) and 10-in (254 mm) sizes.

View

Malco FCP1 Multi-Purpose Chain Link Fence Tool
Multi-Purpose Fencing Pliers

Combination hammer, wire tensioner, staple remover, wire cutter and splicer.

View

Hog Ring Pliers 9 Gauge, Malco Products
Hog Ring Pliers 9-Gauge

Commercial grade Hog Ring Pliers with Magazine installs 9-Ga. (3.8 mm) collated aluminum rings or exclusive 9-Ga. (3.8 mm) collated steel rings. Easily secures 7-Ga. (4.5 mm) wire to 9-Ga. (3.8 mm) chain link fence.

View

Hog Ring Pliers with Self-Feeding Magazine for 1-3/16″ (30 mm) Rings

The HRP4 Chain Link Fence Stapler works fast to install Malco HR4 (1-3/16″, 30 mm) Hog Ring Staples.

View

Hog Ring Pliers with Self-Feeding Magazine

The HRP2 Chain Link Fence Stapler works fast to install Malco HR2 (3/4″, 20 mm) Hog Ring Staples capable of gripping a combination of 9-gauge (3.8 mm) chain link and 7-gauge (4.6 mm) tensioning wire.

View

Hog Ring Pliers – Compact

HRP1 Chain Link Fence Stapler is compact, lightweight and spring actuated. Compatible with both Malco HR1 (5/8″, 16 mm) and HR2 (3/4″, 20 mm) Hog ring Staples.

View

Hog Ring Staples

The Malco Hog Ring Staple offering ranges from petite 5/8″ (16 mm) and versatile 3/4″ (20 mm) galvanized rings to big 1-3/16″ (30 mm) galvanized. See specification table and diagrams for easy selection.

View

Hog Ring Staples 9-Gauge

The Malco Hog Ring Staple offering ranges from petite 16-ga. (1.3 mm) and versatile 14-ga. (2 mm) galvanized rings to big 9-ga. (3.8 mm) galvanized. See specification table and diagrams for easy selection.

View

Chain Link Fencing Offset Ratcheting Wrench
Offset Ratcheting Wrench for Fencing

Offset ratcheting wrench with 12-point sockets at each end accommodates 1/2 inch and 9/16 inch hex fasteners.

View

Chain Link Fence Tools, Tensioning Claws
Fence Tensioning Claws

Holds chain link in position while securing a fence section to post. The FTC1 set of two claws is handy for light commercial or residential one person installations.

View

Vinyl Fence Notcher next to two pieces of notched vinyl fence posts
Hand Notcher – Vinyl Fence 1/2″ and 3/4″

Creates 1/2 and 3/4 inch (19.1 mm) wide, 7/8 inch (22.2 mm) deep louver-shaped tabs to lock vinyl pickets and rails in place.

View

String and Reel

High visibility string reel used for layout. Equipped with 500-feet (152 m) of braided nylon line.

View