TurboShear® – 16 Gauge Metal Cutting Drill Attachment


Step up to heavy-duty metal-cutting performance with a 16-gauge (1.52 mm) capacity TurboShear from Malco Products. The Model TSA2 TurboShear Drill Attachment makes a power drill a powerful metal-cutting shear, instantly! Cutting applications in construction mild grade steel. Clearance between the shear’s cutting inserts may be adjusted for optimal performance within a range of 16 to 26-gauge (1.52 to 0.46 mm) mild steel. A helical (spiral) shaped foot permits easy left, right or straight cutting action. And a 5-position 0 to 90 degree (0, 22.5, 45, 67.5 and 90) adjustable head angle makes this TurboShear exceptionally maneuverable for cuts through profiles and into tight spaces.

The model TSA2 attachment option is an ideal accessory for cordless drills and features an aluminum shear head and telescoping drill clamp for sure one-handed control. The aluminum cast head also offers an additional safe gripping area when needed. The compact molded polymer clamp ensures operational ease by adjusting for both length and width of any drill housing, including smaller bodied lithium-ion battery powered units.

Long-life, 4-sided, carbon steel cutting inserts are designed to be periodically rotated together to maximize service life before replacement. Insert cutting life is rated at 1,200-ft (365.76 m), at a minimum, in maximum capacity 16-gauge (1.52 mm) steel using all four edges of the cutting inserts. Cutting life of inserts increases dramatically when averaged over cutting applications in a variety of steel thicknesses from 16 to 26-gauge (1.52 to 0.46 mm). Cutting inserts are accessible without disassembly of the shear head casings and are easily replaced on the job.

Features

  • Comes completely assembled and ready for service.
  • Adjustable cutting clearance. Clearance between the shear’s cutting inserts may be adjusted for optimal performance within a range of 16 to 26-gauge (1.52 to 0.46 mm) mild grade steel.
  • Cuts any pattern. A helical (spiral) shaped foot permits easy left, right or straight cutting action.
  • Adjustable head. A 5-position 0 to 90 degrees (0, 22.5, 45, 67.5 and 90) adjustable head angle makes these TurboShears exceptionally maneuverable for cuts through profiles and into tight spaces.
  • Long-life, 4-sided, cutting inserts. Inserts are designed to be periodically rotated together to maximize service life before replacement. Cutting inserts are accessible without disassembly of the shear head casings and are easily replaced on the job.

Specifications

Catalog #DescriptionDrill RequirementsHead Angle AdjustmentNet Weight
TSA216-Gauge Metal-Cutting TurboShear Drill AttachmentMinimum 14.4 Volt Cordless/Maximum 7 Amp A/C0, 22.5, 45, 67.5, 90 Degrees3.3 lbs. (1.50 kg)
TSDCDrill Clamp----8 oz. (227 g)
TSCGHeavy-Duty Chuck Guard----.96 oz. (27g)
TSA1RBReplacement Cutter Inserts----4 oz. (113.4 g)

 

Capacities: Inches (mm)

Galvanized Steel 16 Gauge Cold Rolled 16 Gauge
.064 (1.63) .060 (1.52)

Downloads

Catalogs:

My Review for TurboShear® – 16 Gauge Metal Cutting Drill Attachment

  • This field is for validation purposes and should be left unchanged.