C-RHEX™ Dual-Sided Magnetic Hex Drivers
Malco’s C-Rhex Dual Sided Magnetic Hex Drivers, are available in 4 convenient sizes:
- 2 inch (Model MSHC)
- 2-5/8 inch (Model MSHLC)
- 4 inch (Model MSHMLC)
- 6 inch (Model MSHXLC)
Quickly change between 1/4in. and 5/16in. hex sizes with Malco’s unique, exclusive, dual-sided magnetic hex drivers. The reversible hex socket fits over a 1/4-inch magnet-tipped, ball locking hex shaft, and can be quickly reversed to change sizes. Eliminate troublesome buildup of metal shavings in the hex tip with the “Easy Clean Magnet”. Just swipe with a glove or shop towel to clear any metal shavings. Tested torque of the reversible hex chuck driver design is equal to one-piece drivers.
Check out our product spotlight for the Dual-Sided Magnetic Hex Driver on Tool Barn’s Barn Banter.
|Catalog #||Description||Color Code||Hex Openings in.||Nose Diameter in. (mm)||Hex Shank in. (mm)||Overall Length in. (mm)|
|MSHC||Dual-Sided Reversible Hex Driver||Red 1/4 in.,Yellow 5/16 in.||1/4, 5/16||1/2 (13)||1/4 (6)||2 (51)|
|MSHLC||Dual-Sided Reversible Hex Driver||Red 1/4 in.,Yellow 5/16 in.||1/4, 5/16||1/2 (13)||1/4 (6)||2-5/8 (59)|
|MSHMLC||Dual-Sided Reversible Hex Driver||Red 1/4 in.,Yellow 5/16 in.||1/4, 5/16||1/2 (13)||1/4 (6)||4 (102)|
|MSHXLC||Dual-Sided Reversible Hex Driver||Red 1/4 in.,Yellow 5/16 in.||1/4, 5/16||1/2 (13)||1/4 (6)||6 (152)|
Kathy- Town and Country Ind
more sizesthis is a great product would love more size.
HandyI love how handy these bits are. After using my second purchased "flip bit" (I lost my first bits head), I noticed screws weren't holding in the bit as well while inpacting them. Today I bought another 2" and a new 6". It seems that my old bit lost its magnetism compared to the new bits. I can't wait to collect all 4 lengths!
HVACBest bit I ever had for this trade waiting for 7/16& 3/8. And 1/2 & 9/16 so I can dump all my other bits in the trash
LOVE IT!Just picked up half a dozen for our lab. Always having to change between one size or the other... those days are over! Easy to clean and well made.
Jason Bohling/Johnstone Supply
MSHC SERIES, NEED 3/8 AND 1/2ARE THERE ANY PLANS TO MAKE A MSHC DUAL SIDED MAGNETIC HEX DRIVER IN A 3/8X 1/2 COMBINATION? WE HAVE HAD SEVERAL REQUESTS FOR THIS
dual sided hex driverI love this driver but can you offer it in 7/16" and 3/8" and a 1/2" and 9/16" where I can get full coverage of the common drivers I need and use daily
Awesome toolBring on the 6", must have!!!!
GreatVery well made tool. Make a 6 inch one please.
6 IN SHAFTWORKS GREAT! NEED A 6 IN. SHAFT NOW
Greatest inventionThis is the best design for a nut driver. Saves you so much time without having to change between 1/4 and 5/16 drivers. I can't wait to see if they make a 6" long one also.