Malco Tool Talk Blog

Air-Actuated Solution For Controlled Dent Removal For Both The Specialist And Push-To-Paint Repair Tech

5th April 2013 • Categories: Autobody Tools, New Product, Rapid Dent Removal

QUIET POWER Malco Products RDR Rapid Dent Removal Air Tool Malco’s innovative Rapid Dent Removal System, “RADiTAP”, compliments the skills of both the paintless dent removal specialist and the collision repair technician. Both disciplines stand to lower costs with this dent removal system and add to the bottom line via time savings and reduced material, […]

Malco Outlet Punches & Saws

25th February 2013 • Categories: Gutter Outlet Tools, New Product

A Complete System for Cutting Downspout Drop Holes! RATCHETING TOOL AND PUNCH SOLUTION FOR POPULAR K-STYLE ALUMINUM GUTTER: A versatile, lightweight Malco Tool Frame accepts your choice of separate Rectangular and X-Style Punch and Die combinations: 2.2 x 3.2 in (56 x 81 mm); 2 x 3 in (51 x 76 mm); 3 x 4 […]

MALCO AVs VERTICAL SNIPS

7th September 2012 • Categories: AV Vertical Snips, New Product, Product Introductions

Easy Gripping in Tight Spaces and Overhead The jaws of these sleek, compact and lightweight aviation snips are set at a 90-degree angle to the handles for easy upright gripping when cutting in confined spaces or overhead. The user can follow circular or rectangular pattern cuts with either a pushing or pulling motion. A serrated […]

THE MALCO QUALITY SOLUTION FOR CRIMPING BOTH LARGE AND SMALL DUCT FASTER AND EASIER BY HAVING DRILL POWER DO ALL THE WORK!

6th June 2012 • Categories: Crimpers

The Malco Turbo-X-Tools-CR Crimping Drill Attachment makes faster, easier, more precise, air-tight crimps in 24 to 30-gauge (0.71 to 0.41 mm) galvanized round duct, spiral duct, ultra-light aluminum duct and hardened (0.61 – 0.31 mm) black stove pipe. Just insert the drive shaft of our power-assisted Crimper attachment into the chuck of your cordless drill. […]

FAST INSTALLATION OF 9-GAUGE HOG RINGS ON CHAIN LINK

25th January 2011 • Categories: Chain Link Fence, New Product, Product Introductions

Commercial grade Hog Ring Pliers with Magazine installs 9-Ga. (3.8 mm) collated aluminum rings or exclusive 9-Ga. (3.8 mm) collated steel rings. Easily secures 7-Ga. (4.5 mm) wire to 9-Ga. (3.8 mm) chain link fence. One of the features of the HRP5 is an auto-feed magazine that ensures uninterrupted operation. The Malco 9-Gauge (3.8mm) Collated […]

Attention Roofing Pros. Coming Soon to a Distributor near You.

15th December 2010 • Categories: New Product, Product Introductions, Slate Cutting Tools

ROCK SOLID TURBOSHEAR PERFORMANCE Now make your power drill a slate-cutting power shear! The Malco TurboShear Model TSNS1 attaches to a corded or cordless electric drill for making straight, angled or curved cuts in 4 to 8 mm natural roofing slate fast and easy. Get superior results with less waste! An operating speed of 1400 […]

Two Easy Solutions for Cutting Fiber Cement Not an Easy Choice?

30th September 2010 • Categories: Fiber Cement Guillotines, Product Introductions

Guillotines Generate Minimal Dust! A guillotine-style Angle Cutter and dedicated straight-cutting Guillotine Shear offer a choice of two quiet-quality solutions for cutting fiber cement siding planks while generating minimal dust. And both of these easy-operating manual shears make efficient, ultra-clean, precise cuts without compressing the 5/16” (8 mm) trim edge of the plank. For making […]

The reasons are EASY TO GRASP why pros prefer MAX!

16th March 2010 • Categories: Max Snips, New Product

NEW NARROWER GRIP OPENINGS OF ALL MALCO MAX2000 AVIATION SNIPS fit large or small hands without sacrificing length of cut! ALL-NEW, EXCLUSIVE MAX2000 DOUBLE CUT SNIP DESIGN sets an all-new standard for performance! NEW LATCHES ON ALL MAX2000 SNIPS will not loosen or hang up! Malco Max2000 Aviation Snips now feature all-new, molded thermoplastic gripped […]

Malco GOLD STANDARD Hole Cutters handle up 20-gauge steel!

10th November 2009 • Categories: Hole Cutters, New Product, Product Introductions

Distinctive gold Cutter Bits, gold Bearings and a gold Pivot Pin are visual assurance that you have purchased the longest lasting, fastest cutting, easiest adjusting hole-cutting solution for sheet metal applications. With a 20-gauge capacity in galvanized steel (1.02mm) or mild steel (0.91mm), Malco Hole Cutters are ideal for making large or small diameter take-offs […]

HVAC Sheet Metal Fabrication

Fiberglass Duct Essentials

Gutter Installation Tools

Fiber Cement Siding / Backerboard Essentials

Roofing Essentials

Vinyl Siding Installation

Fence Installation Essentials

Shears, Saws, Snips, and Other Cutting Tools

Fastening Tools

Tubing Tools

Drywall/Ceiling

Marking & Scribe Tools

Jobsite Essentials

Measuring Tools

Pliers

Automotive Essentials

Tool Bags and Kits

Air-Actuated Solution For Controlled Dent Removal For Both The Specialist And Push-To-Paint Repair Tech

Malco Outlet Punches & Saws

MALCO AVs VERTICAL SNIPS

THE MALCO QUALITY SOLUTION FOR CRIMPING BOTH LARGE AND SMALL DUCT FASTER AND EASIER BY HAVING DRILL POWER DO ALL THE WORK!

FAST INSTALLATION OF 9-GAUGE HOG RINGS ON CHAIN LINK

Attention Roofing Pros. Coming Soon to a Distributor near You.

Two Easy Solutions for Cutting Fiber Cement Not an Easy Choice?

The reasons are EASY TO GRASP why pros prefer MAX!

Malco GOLD STANDARD Hole Cutters handle up 20-gauge steel!

Stay in the know

Have a product idea?

2019 Holidays Observed/Holiday Closing Dates

Product Categories

Stay in the know

Have a product idea?

2019 Holidays Observed/Holiday Closing Dates