TurboShear® – Asphalt Shingle Shear Drill Attachment


Malco’s Asphalt Shingle Shear quickly attaches to a corded or cordless drill to make clean straight, circular or square cuts in asphalt shingles. Use this versatile TurboShear drill attachment to:

  • Make fast, clean, trim cuts in asphalt shingles along a roof valley
  • Or tight left square cuts and circles to fit around utility outlets

An extra-wide jaw opening with beveled lead-in tip on the upper blade accommodates multiple shingle layers. A wide, flat, lower blade offers exceptional operator control. The shears are made with heat-treated carbon steel blades with solid carbide inserts, which hold their edge longer in any life-rated shingle or shingle thickness. lateral blade adjustment capabilities ensure that optimum cutting performance and maneuverability can be maintained for the life of the blades. Blades on the shingle shear are replaceable and easy to install on the job.

A sleek, lightweight aluminum cast shear head and molded drill clamp allow maximum portability and ease to go wherever the work is. The patented compact telescoping drill clamp adjusts to fit both length and width of popular drill sizes, including smaller bodied impact drivers. Optional spacers are stored on clamp for large motor housings. A clamp collar allows the shear head to be rotated 360° and set in any position for optimum tool clearance when navigating roof lines or to facilitate easy material flow.

Drill Clamp Patent #9,649,702

Features

  • Fits cordless drills
  • Cuts straight and left
  • Lightweight
  • Telescoping drill clamp
  • Wide Jaw opening
  • Long lasting blades
  • Easy blade replacement

Specifications

Catalog #DescriptionNet Wt.
TSS1TurboShear Asphalt Shingle Shear2.3 lbs. (1.04 kg)
TSS1CEVTurboShear Shingle Shear with Carrying Case4.32 lbs. (1.96 kg)
TSS1RBEVReplacement blades for TSS1 and TSS1A--
TSCGReplacement Chuck Guard--
TSDCTelescoping Drill Clamp*--

 

Capacities: in (mm)

Asphalt Shingles
1/2 (12.7)

*Compatible with all current and pre-existing Malco TurboShears in the market. Use it to make the orginal TS1 TurboShear a one-hand operation by adding a clamp, or to replace the clamp of any of the following TurboShear models: TSHD, TSF1, TSF2, TSS1 or TSNS1.

Drill Requirements: Min 1/4 in. (6.35mm) Chuck, Min 14.4 V-DC/Max 7 A-AC

FAQs

What materials will the turbo shear cut?

TSS1 – The Turboshear is rated to cut up to 1/2″ (13mm) of asphalt shingles.

How clean is the cut?

The Turboshear shingle cutting series will make clean cuts throughout the range of thicknesses of material listed above. The tool will need to be adjusted when going from very thin to thick material and vice versa.

How do you adjust the tool to get the optimum cut?

TSS1 – The clearance between the cutting jaws is adjustable in order to achieve the optimum cut for thick or thin material. To adjust, locate the 3/16” set screw on the back of the tool, towards the front of the tool near the jaws. Turn it clockwise to tighten the gap of the jaws for thinner material or counterclockwise to make the gap of the jaws larger for thicker material.

My Review for TurboShear® – Asphalt Shingle Shear Drill Attachment

  • This field is for validation purposes and should be left unchanged.