Roofing - Metal

Product Categories

Drill Attachment For Sheet Metal
TurboShear® – Heavy Duty, Sheet Metal Cutting Attachment

Quickly attaches to the chuck of a minimum 12-volt cordless or an A/C electric drill. A 18 gauge capacity in galvanized sheet metal. Telescoping clamp fits large or small drill housing.

View

TurboShear® – Heavy Duty Sheet Metal Cutting, Pneumatic

Use AIR PRESSURE for unstoppable shearing power in heavy sheet metal.

View

TurboShear® – Corrugated Metal Cutting Drill Attachment

For cross-cuts, lengthwise trimming and circular or square outlets in 30 to 24 gauge (0.31 – 0.61 mm) corrugated metal.

View

New


TurboShear® – Double Cut Drill Attachment

Make your drill a double-cut metal shear. Now you can get double-cut performance in a versatile Malco TurboShear.

View

New


TurboShear® – Double Cut, Pneumatic

Now you can get double-cut performance in a versatile Malco TurboShear Air Tool.

View

TurboShear®

Quickly attaches to the chuck of a minimum 12-volt cordless or an A/C electric drill. A 20 gauge capacity in galvanized sheet metal.

View

Painted Sheet Metal Screws

Available in royal brown, musket bronze, almond, white, classic cream and clay.

View

3-Station Edge Roller

Exclusive 3-station roller design assures a uniform bend along entire length of material. The simplicity and time saving capabilities for the job at hand, make this a must have metal roofing tool!

View

High Leverage Drip Edge Folding Tools

Big 24-inch (61 cm)and the compact 18-inch (46 cm) folding tool makes 1-inch (25.4 mm) or 1-1/2-inch (38.1 mm) deep bends along drip edge of flat-pan standing seam metal roofing panels.

View

Hand Seamers with Cast Zinc Jaws

For bending, seaming and straightening non-ferrous metals and limited flattening/straightening applications in light gauge steel.

View

Hand Seamers with Forged Jaws

For bending metal and flattening seams, as well as straightening sheet metal or safely gripping and moving metal on the job.

View

S10
Cast Steel Seamer & Tongs

Durable all-cast-steel construction, maneuverable offset and straight designs, versatile deep jaw openings, precise 135 degree bending capabilities and non-marring vinyl-gripped jaw options.

View

New


Stone Coated Steel Roofing Cutter

Fast, safe, precise cuts, 30% easier, all season long, in stone coated steel shingles, shakes and tile style roofing.

View

“Gold Standard” Malco Hole Cutters and Cutter Bits

Distinctive gold Bits, Bearings and Pivot Pin signify the longest lasting, fastest cutting, easiest adjusting solution for cutting holes in sheet metal. Up to 20-gauge (1.02 mm) capacity in galvanized steel.

View

Angle Drive Accessory

1:1 Gear Ratio accessory to assist the Hole Cutters in making take-off holes in sheet metal ductwork.

View

New


Aviation “Mini” Snips – Left and Right Cutting Offset

The compact, offset AVsMini easily goes to work in tight spaces where full-size aviation snips are challenged. Offered in both a right and left offset cut style.

View

Aviation Snips – AVs

Aviation style steel metal snips for straight cuts and slightly curved cuts in either direction. Traditional design with forged steel jaws, torsion handle spring and side latch.

View

Aviation Snips: Offset AVs

Aviation style steel metal snips for straight cuts and slightly curved cuts in either direction.

View

Aviation Snips: Max2000®

Don’t let handle preference stand between you and the “hands down” best quality aviation snip on the market. Now you can get a grip on the grip that fits with either original Max2000 handle grips or an all-new-again, traditional gripped version we call Max2000 Classic. Either way you choose, no other aviation snip outcuts, outmaneuvers or outlasts Max!

View

Aviation Snips: Offset – Max2000®

Don’t let handle preference stand between you and the “hands down” best quality aviation snip on the market. Now you can get a grip on the grip that fits with either original Max2000 handle grips or an all-new-again, traditional gripped version we call Max2000 Classic. Either way you choose, no other aviation snip outcuts, outmaneuvers or outlasts Max!

View

Aviation Snips: Bulldog – Max2000®

Max2000 bulldog notching and trimming aviation snip with Euro-styled ergonomic handles.

View

Aviation Snips: Double Cut – Max2000®

Max2000 distortion-free, double-cut aviation snip with Euro-styled ergonomic handles.

View

Andy Aluminum Handled Snips 12″

12 inch (31 cm) long aluminum handled snips with heat treated cutlery grade replaceable steel blades.

View

Andy Aluminum Handled Snips 14″

14 inch (36 cm) long aluminum handled snip with heat treated cutlery grade replaceable steel blades.

View

New


Ultra Lightweight Metal Cutting Snips

The ULC10 Ultra Lightweight Metal Cutting Snip offers a light, yet powerful option for cutting aluminum, and 26 to 24 gauge steel.

View

Forged Steel Snips

Forged steel snips for cutting straight, wide curves, and notches. Three types of forged snips from Malco include regular pattern, circular duckbill, and bulldog pattern snips.

View

Circular Saw Blade: Steel

Cool clean cuts in metal roofing and metal building panels.

View

Hollow Hex Chuck Drivers – Color Coded

Malco precision fit and hardened Hollow Hex Chuck Drivers, with 1/4-inch power insert shanks.

View

CONNEXT® – Hollow Nut Drivers

CONNEXT Quick Change handles from Malco, combined with precision-fit and hardened Malco Hollow Hex Chuck Driver shaft components, offer the ultimate in Nut Driver durability and flexibility.

View

CONNEXT® – Quick Change Handles

Clear, molded acetate CONNEXT handles are shock-proof, shatter-proof and fluted to fit any hand.

View

Magnetic Hex Chuck Drivers – Color Coded

Malco precision fit and hardened Magnetic Hex Chuck Drivers, with 1/4-inch power insert shanks.

View

CONNEXT® – Magnetic Hex Hand Drivers

CONNEXT Quick Change handles from Malco, combined with precision-fit and hardened Malco Magnetic Hex Chuck Driver shaft components, offer the ultimate in Hex Hand Driver durability and flexibility.

View

CONNEXT® – Magnetic Hex Driver & Nut Driver Kits

Connext Quick Change handles from Malco now are offered in Kits

View

Sheet Metal Double Ender Drill Bits

Two points for twice the life, twice the convenience.

View

Sheet Metal Drill Bits

Sheet metal drills with 135° split point design bite into metal precisely where wanted – will not wander.

View

Carbide Tipped Rotary Percussion Bits

Use in any rotary or rotary percussion drilling device for unexcelled performance in brick, tile, granite, concrete, masonry and other similar hard and dense materials.

View

Jobber Drill Bit Kits

General purpose drills. 118° conventional point angle allows deep drilling in a variety of materials including metal.

View

Step Drills

A unique double flute design assures the penetration of soft or thin materials at the proper speed.

View

Driver Bit Pouch

Fits cordless or corded drills. Durable elastic bands easily loop around motor housing for handy bit storage.

View

Magnetic Bit Holder

Power drive 1/4-inch hex shank fits any power drill or 1/4-inch power drive holder. Accepts 1/4-inch hex shank insert bits.

View

Phillips Chuck Drivers

Power drive 1/4-inch hex insert shank fits any electric power drill or 1/4-inch power drive holder.

View

Phillips Insert Bit

Fits any 1/4-inch hex magnetic bit holder.

View

New


4IN1 Multi-Socket Nut Driver

Telescoping driver shafts provide 2 hex sockets at each end of compact handle. 4 hex sizes: 1/4”, 5/16”, 3/8”, and 7/16”

View

6 in 1 Reversible Screwdriver

Combination bits change to drive 6 different head styles or sizes.

View

Hand Riveter: 2IN1

Rivet gun for blind rivets with 1/8 inch thru 3/16 inch mandrels.

View

Hand Riveter: Economy

Lightweight, compact size and slim nose projection allows this riveter to go wherever the work is.

View

Painted Rivets with Aluminum Rivet and Mandrel

Painted rivets packaged in 100 piece bags.

View

Blind Rivets

Malco blind rivets provide a strong, secure connection between 2 or more sheets of material, that will not loosen with vibration.

View

Black Utility Caulking Gun
Utility Caulking Gun

Easy loading and lightweight for smooth, clean operation.

View

Easy Dispensing Caulking Gun

Smooth action with large, comfortable power grip.

View

Flexible Lightweight Caulking Gun

Compact design stores in a toolbox.

View

Professional Square Piston Design Caulking Gun

Heavy duty professional model caulking guns with thumb-activated pressure release.

View

Carbide Tipped Scribe

Solid carbide tip for scribing fine lines on hardened steel as well as glass, ceramics, plastics or sheet metal.

View

Square Head Chuck Drivers

For driving square head, (Robertson), screws into wood and sheet metal.

View

Hand Held Magnetic Sweep

Powerful magnetic surface efficiently picks up debris. Quick release sleeve allows debris to be easily removed. Quick, Easy, Efficient!

View

Pin Vise

Use in hand or insert in drill chuck. Pin Vise holds wire gauge drill sizes 61 to 80.

View

Adapter for hex power driver
Quick Change Hex Adapter

Fits 3/8-inch or larger power drills. Holder accepts 1/4-inch hex shank chuck drivers and bits.

View

Scratch Awls

Use to scribe lines on metal, plastic and a variety of other materials. Pierce holes in wood, plastic, leather, – even light gauge metal.

View

Soft Sided Tool Bag

Rugged, heavyweight nylon tool bag organizes large and small tools with ample capacity and multiple interior and exterior pockets.

View

New


Tool BackPack

Easily organize, protect and transport your tools in a 33-pocket Ballistic Nylon Backpack.

View

Tote Tray

Heavy duty, crush proof tote trays are great for carrying hand tools and fasteners to the job site.

View

Reciprocating Saw: Metal

Reciprocating saw blade for cutting various forms of metal.

View

New


Writable Measuring Tape

Malco 1 inch x 25 foot Measuring Tape features quick-note case and versatile double-sided blade with four hook points.

View

1" x 16' Magnetic Tip Tape Measure
Magnetic Measuring Tape

Pick the one tape from a choice of three that is ideal for your metalworking needs!

View

New


Writable Magnetic Tape Measure
Writable Magnetic Measuring Tape

Tape measure with writable/erasable case, 1 inch x 25 foot double-sided blade and magnetic tip with four hook points.

View

Measuring Tape

Rubber-Clad Housing

View