Automotive Tools

Product Categories

Hole Punch and Flange Air Tool – 5/16 Inch Hole

Punches a 5/16 in (8 mm) hole and forms a nominal 7/16 in (11 mm) L, 1 in (25.4 mm) W and .040 in (1 mm) D offset flange.

View

Hole Punch and Flange Air Tool – 13/64 Inch Hole

A two-sided rotating head punches a 5 mm (13/64 in.) hole with one side and a 1 mm (.040 in.) deep offset flange with the other.

View

New


Malco's CSH5 and CSH8 Flexible Automotive Sanding Blocks
Conformable Sander

Holds hand-set shapes for sanding contours. Reset shape without damage to standard hook and loop back abrasive paper.

View

Malco Door Hemming Tool Drill Attachment
TurboXTools™ DH Door Hemming Drill Attachment

Drill attachment for hemming replacement skins on doors of passenger vehicles and light trucks.

View

Malco Air Powered Door Hemming Tool
TurboXTools™ DH Door Hemming Air Tool

Air tool for hemming replacement skins on doors of passenger vehicles and light trucks.

View

TurboXTools™ DSR Door Skin Remover Drill Attachment

Drill attachments for cutting damaged door skins off door frames of passenger vehicles and light trucks. No more dust, dirt or sparks from time consuming grinding. And no risk of burn marks on the door frame.

View

TurboXTools™ DSR Door Skin Remover Air Tool

Air tool for cutting damaged door skins off door frames of passenger vehicles and light trucks. No more dust, dirt or sparks from time consuming grinding. And no risk of burn marks on the door frame.

View

Malco Quarter Panel Hemming Tool Drill Attachment
TurboXTools™ Quarter Panel Hemming Drill Attachment

Attaches to corded or cordless drill to bend and close wheel arc flanges of replacement quarter panels

View

Malco Air Powered Quarter Panel Hemming Tool
TurboXTools™ Quarter Panel Hemming Air Tool

Uses an existing air supply to bend and close wheel arc flanges of replacement quarter panels.

View

TurboShear® Automotive – Heavy Duty

Quickly attaches to the chuck of a minimum 14.4 volt cordless or an A/C electric drill. A 18 gauge capacity in galvanized sheet metal.

View

TurboShear® Automotive – Heavy Duty, Pneumatic

Use AIR PRESSURE for unstoppable shearing power in heavy sheet metal.

View

New


TurboShear® Automotive – Double Cut Drill Attachment

Make your drill a double-cut metal shear. Now you can get double-cut performance in a versatile Malco TurboShear.

View

New


TurboShear® Automotive – Double Cut, Pneumatic

Now you can get double-cut performance in a versatile Malco TurboShear Air Tool.

View

TurboShear® Automotive – 16 Gauge Metal Cutting Drill Attachment

Step up to heavy-metal-cutting performance with a 16-gauge (1.52mm) capacity TurboShear from Malco Products. This TurboShear Drill Attachment is rated for cutting all automotive grade sheet steel including trunk pans and floor boards.

View

TurboShear® Automotive – 16 Gauge Metal Cutting, Pneumatic

Step up to heavy-metal-cutting performance with a 16-gauge (1.52mm) capacity TurboShear from Malco Products. This Air TurboShear is rated for cutting all automotive grade sheet steel including trunk pans and floor boards.

View

TurboShear® Automotive

Quickly attaches to the chuck of a minimum 1200 RPM 3/8″ (9.53mm) cordless or an A/C electric drill. A 20 gauge capacity in galvanized sheet metal.

View

Raditap Rapid Dent Removal System

An air-actuated, long-reach pick solution for rapid dent removal and auto-body repair.

View

Spot Weld Cutter Kit

Contents: 1) 3/8-in. Cutter; 5) Replacement Cutter Bits; 1) Replacement Center Drill; and 1) 5/16-in. Cobalt Drill.

View

10-Piece Screw Extractor Kit

Unique Extractor Kit features Left Handed Cobalt Drill bits and Straight-Fluted Extractors to make screw and bolt extraction faster, easier and safer.

View

Torx Bits and Sockets

Hardened steel Torx Bit with 1/4, 3/8, and 1/2-inch square socket drives.

View

Zip-In Self Piercing Sheet Metal Screw
Zip-In® Self Piercing Sheet Metal Screws

A unique thread design and quality controlled manufacture spell the Zip-In® difference. A sophisticated heat treat process allows the screw to taper to a fine, sharp point without sacrificing critical tip strength. Rated #1, Zip-in® Screws are the Best Selling Sheet Metal Screw Worldwide.

View

Hand Seamers with Cast Zinc Jaws

For bending, seaming and straightening non-ferrous metals and limited flattening/straightening applications in light gauge steel.

View

Malco 6 inch Forged Hand Seamer
Hand Seamers with Forged Jaws

For bending metal and flattening seams, as well as straightening sheet metal or safely gripping and moving metal on the job.

View

S10
Cast Steel Seamer & Tongs

Durable all-cast-steel construction, maneuverable offset and straight designs, versatile deep jaw openings, precise 135 degree bending capabilities and non-marring vinyl-gripped jaw options.

View

Aviation Snips: Max2000®

Max2000 and Max2000 Classic: Standard Left, Right and Combination Cutting Aviation Snips have wide-opening jaws with a serrated lower blade for fast controlled cuts in vinyl plastics, layered metals and seams. Precisely ground blade tips also cut into tight spaces and flush to 90° walls.

View

Aviation Snips: Offset – Max2000®

The Max2000 Offset Aviation Snips are offered in two handle styles, regular Max2000 and Max2000 Classic. Both handles provide superior hardened blade edges for “maximum” cutting life.

View

Aviation Snips: Bulldog – Max2000®

Max2000 bulldog notching and trimming aviation snip with Euro-styled ergonomic handles.

View

Malco M12N Snips for Vinyl Siding, Sheet Metal, Aluminum
Andy Aluminum Handled Snips 12″

12 inch (31 cm) long aluminum handled snips with heat treated cutlery grade replaceable steel blades.

View

Andy Aluminum Handled Snips 14″

14 inch (36 cm) long aluminum handled snip with heat treated cutlery grade replaceable steel blades.

View

Andy Combination Snip for Vinyl and More!

Versatile 12-inch (31 cm) long aluminum handled combination snip with knife-like edge slices through heavy vinyl siding lockseams and other flexible non-ferrous materials with ease.

View

Tube Slicer

Produces cuts in ABS, PVC, rubber and fabric reinforced hose up to 1 inch I.D. An ideal solution for cutting PEX tubing.

View

Sheet Metal Double Ender Drill Bits

Two points for twice the life, twice the convenience.

View

Step Drills

A unique double flute design assures the penetration of soft or thin materials at the proper speed.

View

Hand Riveter: 2IN1

Rivet gun for blind rivets with 1/8 inch thru 3/16 inch mandrels.

View

Flexible Lightweight Caulking Gun

Compact design stores in a toolbox.

View

Professional Square Piston Design Caulking Gun

Heavy duty professional model caulking guns with thumb-activated pressure release.

View

Easy Dispensing Caulking Gun

Smooth action with large, comfortable power grip.

View

Black Utility Caulking Gun
Utility Caulking Gun

Easy loading and lightweight for smooth, clean operation.

View

Expandable Trammel Points

Two sizes handle a variety of layout applications. The TR42 expands to a big 42” (107 cm) radius. The compact TR18 expands to 18” (46 cm) and stores in most tool bags.

View

Tube Benders

These budget priced tools are for bending soft tubing including brake lines to any shape without collapsing walls.

View

Adjustable Sheet Metal Scribe

Measure, mark and scribe trim lines on sheet metal in one easy operation. Set desired trim depth on scriber extension and tighten knob.

View

Scratch Awls

Use to scribe lines on metal, plastic and a variety of other materials. Pierce holes in wood, plastic, leather, – even light gauge metal.

View

Pocket Sized Sheet Metal Scribe

Scribe commonplace trim lines on galvanized sheet metal quickly and accurately.

View

Dead Blow Hammer

One-piece, 17-ounce (482 g) urethane hammer is non-marring, non-sparking and non-recoiling.

View

Fin Straightening Tools

The FST tools straightens commonplace 8, 10, 12, or 14 fins per inch. Use the FST2 tool for straightening closely spaced 16, 18, 20, or 22 fins per inch.

View

Soft Sided Tool Bag

Rugged, heavyweight nylon tool bag organizes large and small tools with ample capacity and multiple interior and exterior pockets.

View