Made in USA

7th Mai 2015 • Categories: Autobody Tools, Construction, Made in USA, Product Introductions, Products

Presented here are some jottings and discussion threads intended to generate sharing of thoughts and feedback on the meaning and merits of “Made in USA” for you.  Please be civil so that all may be heard.  What does the term Made in USA Mean? The Federal Trade Commission (FTC), in brief, defines use of the […]

READ MORE...

Socket-Drive TORX Bit Kit

5th März 2015 • Categories: Connext-Handles, Construction, HVAC, New Product, Product Introductions, Products

ALL THE RIGHT CONNECTIONS  Paired with a Versatile CONNEXT3™ Quick-Connect Ratcheting Handle TXSK1 KIT CONTENTS 12 Socket Drive Torx Bits 3 Hex Drive Adapters for 1/4, 3/8 & 1/2 in Square Drives CONNEXT3™ Ratcheting Handle with 1/4 in Holder Durable Polymer Case   NOTE: Not for use with impact drivers. Sure, you can use other […]

READ MORE...

“PAN STYLE” MINI-BRAKE

9th Dezember 2014 • Categories: Construction, Metal Bending, Mini Brake, New Product, Product Introductions, Products

GOES WHEREVER YOU NEED IT TO Fabricate drip pans, register boxes, and complex angled corners for flashing and fascia, right there on the job!   At just under 100 pounds (45 kg), if you remove just two screws, you can separate the Malco MB48B “Pan Style” Mini-Brake Anvil and frame to easily move it around the […]

READ MORE...

TurboShear and TurboXTool Attachments

9th Oktober 2014 • Categories: Asphalt Roofing Rools, Backerboard, Construction, Fiber Cement, Product Introductions, Products, TurboXTools, Uncategorized, Vinyl Siding

NOW EVEN MORE USER-DRILL FRIENDLY! Versatile NEW 1/4 inch Hex Drive Shafts Fit A Broader Range of Drills including Quick Release Impact Drivers Malco TurboShear and TurboXTool Drill Attachments  are now even more user-drill-friendly with the introduction of a new hex shank drive shaft that fits a broad range of 1/4 to 1/2 inch (6.35-12.7mm) […]

READ MORE...

FAST SmartTool and SmartClip System is a SMART Choice!

10th Juli 2014 • Categories: Construction, New Product, Pex to Wire Radiant Heat Tools, Product Introductions

A FASTER, SMARTER way to attach PEX to a wire grid and foamboard base.                                      Based on actual field trials, the SmartTool and SmartClip stapling system is 80% faster than hand tool or hand tying methods.  You might […]

READ MORE...

THE BIG EASY

14th Mai 2014 • Categories: Construction, Product Introductions

The Malco Channel Shear for drywall metal stud and runner is EASY LOADING, EASY CUTTING, EASY TO CARRY and STORE, and now EASY ON THE BUDGET! The Malco Channel Shear Model SRC24A cuts completely through a drywall metal stud or runner in one easy stroke without deforming the channel shape. A unique die assembly surrounds […]

READ MORE...

MALCO 2013 BE A STAR BLOG CONTEST:

19th September 2013 • Categories: Autobody Tools, New Product, Product Introductions, Products, Turbo Shears, Want to be a Star

Congratulations to our TurboShear Testimonial Winners, Jonathan Diehl and Evan Gehman! Thank you Jonathan and Evan for your winning testimonial submissions stating how much you absolutely love and cherish your Malco TurboShear.  How fitting that you should receive another Malco TurboShear of your choice as an award! Jonathan Diehl wrote a testimonial for the “Original” […]

READ MORE...

MALCO AVs VERTICAL SNIPS

7th September 2012 • Categories: AV Vertical Snips, New Product, Product Introductions

Easy Gripping in Tight Spaces and Overhead The jaws of these sleek, compact and lightweight aviation snips are set at a 90-degree angle to the handles for easy upright gripping when cutting in confined spaces or overhead.  The user can follow circular or rectangular pattern cuts with either a pushing or pulling motion.  A serrated […]

READ MORE...

VERSATILE PEX STAPLER FOR WOOD OR FOAMBOARD

19th Januar 2012 • Categories: Pex to Wood Stapler, Product Introductions

One-Stroke, Magazine Fed Stapling Action for Securing a PEX Layout  used with In-Floor Radiant heating Installations. This non-jamming, magazine-fed stapler operates from a standing position to secure a layout of PEX (polyethylene cross-linked tubing) to a wooden sub-floor or base of foamboard.  A solid, non-stick, one-piece polymer magazine slide directs tool weight over the stapler […]

READ MORE...

EVER LOSE A TOOL? DO YOU WISH YOU COULD MAKE A TOOL STANDOUT AS ALL YOUR OWN?

12th Oktober 2011 • Categories: Customization, Personalization, Product Introductions

Check out our personalized tools to show your personality! Malco offers personalization with a choice of 16 graphics that can be added with your name. Whether laser etched onto the tools or by a label, there will be no question whose tools stand out on the job site. Give them as a gift, or as […]

READ MORE...

Redesigned TurboShear Drill Attachments

3rd Juni 2011 • Categories: Product Introductions, Turbo Shears

You spoke, we listened The new design makes your power drill into a versatile power shear.  Malco TurboShears attach to virtually any 14.4V or larger corded or cordless drill. The redesign includes sleek, new lightweight, aluminum heads combined with a compact telescoping drill clamp to offer balanced, one-hand control.  The drill clamp adjusts for both […]

READ MORE...

FAST INSTALLATION OF 9-GAUGE HOG RINGS ON CHAIN LINK

25th Januar 2011 • Categories: Chain Link Fence, New Product, Product Introductions

Commercial grade Hog Ring Pliers with Magazine installs 9-Ga. (3.8 mm) collated aluminum rings or exclusive 9-Ga. (3.8 mm) collated steel rings. Easily secures 7-Ga. (4.5 mm) wire to 9-Ga. (3.8 mm) chain link fence. One of the features of the HRP5 is an auto-feed magazine that ensures uninterrupted operation.  The Malco 9-Gauge (3.8mm) Collated […]

READ MORE...

Attention Roofing Pros. Coming Soon to a Distributor near You.

15th Dezember 2010 • Categories: New Product, Product Introductions, Slate Cutting Tools

ROCK SOLID TURBOSHEAR PERFORMANCE Now make your power drill a slate-cutting power shear! The Malco TurboShear Model TSNS1 attaches to a corded or cordless electric drill for making straight, angled or curved cuts in 4 to 8 mm natural roofing slate fast and easy.  Get superior results with less waste!  An operating speed of 1400 […]

READ MORE...

Two Easy Solutions for Cutting Fiber Cement Not an Easy Choice?

30th September 2010 • Categories: Fiber Cement Guillotines, Product Introductions

Guillotines Generate Minimal Dust! A guillotine-style Angle Cutter and dedicated straight-cutting Guillotine Shear offer a choice of two quiet-quality solutions for cutting fiber cement siding planks while generating minimal dust.  And both of these easy-operating manual shears make efficient, ultra-clean, precise cuts without compressing the 5/16” (8 mm) trim edge of the plank. For making […]

READ MORE...

VINYL FENCE POST

11th Februar 2010 • Categories: New Product, Product Introductions, Vinyl Fence Tools

Make easy work of elongating rail slots in wall thickness up to .150 (3.8 mm) Simplify vinyl rail installation for professional results! Vinyl Fence Post Nibblers, from Malco, remove a 1/4

READ MORE...

LABOR-SAVING, MONEY MAKING IN-FLOOR HEATING INSTALLATION

16th Dezember 2009 • Categories: New Product, Pex to Wire Radiant Heat Tools, Product Introductions

3 Least-Cost Solutions for Laying out PEX In-Floor Radiant Heating Systems Experience real savings on every in-floor radiant heating installation with less labor intensive tools from Malco Products. Start with the Malco PEX TUBING UNCOILER! The compact and lightweight Uncoiler easily accommodates 500 ft (152 m) tubing coils of 1 in (25.4 mm) PEX (polyethylene […]

READ MORE...

Malco GOLD STANDARD Hole Cutters handle up 20-gauge steel!

10th November 2009 • Categories: Hole Cutters, New Product, Product Introductions

Distinctive gold Cutter Bits, gold Bearings and a gold Pivot Pin are visual assurance that you have purchased the longest lasting, fastest cutting, easiest adjusting hole-cutting solution for sheet metal applications. With a 20-gauge capacity in galvanized steel (1.02mm) or mild steel (0.91mm), Malco Hole Cutters are ideal for making large or small diameter take-offs […]

READ MORE...

Malco Products Redline Video – Make comments here

2nd Oktober 2009 • Categories: New Product, Product Introductions, Products, Uncategorized

Redline Handles Video – Click here

READ MORE...

Malco TurboShear Family Video – make comments here

9th September 2009 • Categories: New Product, Product Introductions, Products, Turbo Shears

Click here to view the Malco TurboShear Family Video

READ MORE...

Malco TurboShear AIR POWER for both job site and shop applications!

9th September 2009 • Categories: New Product, Product Introductions, Products, Turbo Shears

High speed pneumatic TurboShear models are available for all current TurboShear cutting applications and bring an added dimension to the versatile TurboShear product family. Now there are pneumatic TurboShears for cutting sheet metal, asphalt shingles, fiber cement siding and backerboard. Air-powered TurboShear models offer characteristic premium performance without the premium price. You will find them […]

READ MORE...

Fiber Cement Hand Tools Video comments here

6th August 2009 • Categories: New Product, Product Introductions, Products, Turbo Shears

Malco Products Fiber Cement Hand Tools Video

READ MORE...

FIBER CEMENT TOOLS BY MALCO PRODUCTS

6th August 2009 • Categories: New Product, Product Introductions, Products

Hole Saws, Hand Nibbler, & Guillotine Shear for Fiber Cement For Quality A Cut Above The Rest! Malco

READ MORE...

Redline Video Comments Here

1st Juli 2009 • Categories: New Product, Product Introductions, Products

Redline Video Link (Please click here)

READ MORE...

REDLINE HANDLES BY MALCO

1st Juli 2009 • Categories: New Product, Product Introductions, Products

Tired of hand tools that give your hands a workout? The addition of New REDLINE HANDLES to 22 essential Malco

READ MORE...