Automotive Essentials

Product Categories

Hole Punch and Flange Air Tool – 5/16 Inch Hole

Punches a 5/16 in (8 mm) hole and forms a nominal 7/16 in (11 mm) L, 1 in (25.4 mm) W and .040 in (1 mm) D offset flange.

View

Hole Punch and Flange Air Tool – 13/64 Inch Hole

A two-sided rotating head punches a 5 mm (13/64 in.) hole with one side and a 1 mm (.040 in.) deep offset flange with the other.

View

New


Malco's Conformable Sander
Conformable Sander

Holds hand-set shapes for sanding contours. Reset shape without damage to standard hook and loop back abrasive paper.

View

Malco Door Hemming Tool Drill Attachment
TurboXTools™ DH Door Hemming Drill Attachment

Drill attachment for hemming replacement skins on doors of passenger vehicles and light trucks.

View

Malco Air Powered Door Hemming Tool
TurboXTools™ DH Door Hemming Air Tool

Air tool for hemming replacement skins on doors of passenger vehicles and light trucks.

View

TurboXTools™ DSR Door Skin Remover Drill Attachment

Drill attachments for cutting damaged door skins off door frames of passenger vehicles and light trucks. No more dust, dirt or sparks from time consuming grinding. And no risk of burn marks on the door frame.

View

TurboXTools™ DSR Door Skin Remover Air Tool

Air tool for cutting damaged door skins off door frames of passenger vehicles and light trucks. No more dust, dirt or sparks from time consuming grinding. And no risk of burn marks on the door frame.

View

Malco Quarter Panel Hemming Tool Drill Attachment
TurboXTools™ Quarter Panel Hemming Drill Attachment

Attaches to corded or cordless drill to bend and close wheel arc flanges of replacement quarter panels

View

Malco Air Powered Quarter Panel Hemming Tool
TurboXTools™ Quarter Panel Hemming Air Tool

Uses an existing air supply to bend and close wheel arc flanges of replacement quarter panels.

View

TurboShear® Automotive – Heavy Duty

Quickly attaches to the chuck of a minimum 14.4 volt cordless or an A/C electric drill. A 18 gauge capacity in galvanized sheet metal.

View

TurboShear® Automotive – Heavy Duty, Pneumatic

Use AIR PRESSURE for unstoppable shearing power in heavy sheet metal.

View

New


TurboShear® Automotive – Double Cut Drill Attachment

Make your drill a double-cut metal shear. Now you can get double-cut performance in a versatile Malco TurboShear.

View

New


TurboShear® Automotive – Double Cut, Pneumatic

Now you can get double-cut performance in a versatile Malco TurboShear Air Tool.

View

TurboShear® Automotive – 16 Gauge Metal Cutting Drill Attachment

Step up to heavy-metal-cutting performance with a 16-gauge (1.52mm) capacity TurboShear from Malco Products. This TurboShear Drill Attachment is rated for cutting all automotive grade sheet steel including trunk pans and floor boards.

View

TurboShear® Automotive – 16 Gauge Metal Cutting, Pneumatic

Step up to heavy-metal-cutting performance with a 16-gauge (1.52mm) capacity TurboShear from Malco Products. This Air TurboShear is rated for cutting all automotive grade sheet steel including trunk pans and floor boards.

View

TurboShear® Automotive

Quickly attaches to the chuck of a minimum 1200 RPM 3/8″ (9.53mm) cordless or an A/C electric drill. A 20 gauge capacity in galvanized sheet metal.

View

Raditap Rapid Dent Removal System

An air-actuated, long-reach pick solution for rapid dent removal and auto-body repair.

View

“Gold Standard” Sheet Metal Hole Cutters and Cutter Bits

Distinctive gold Bits, Bearings and Pivot Pin signify the longest lasting, fastest cutting, easiest adjusting solution for cutting holes in sheet metal. Up to 20-gauge (1.02 mm) capacity in galvanized steel.

View