Meet Malco in St. Louis for Comfortech 2015

15th September 2015 • Categories: Autobody Tools, Construction, HVAC, Made in USA, Products, Uncategorized

Calling all you convention goers! Malco Products Inc. will be out in full force at Comfortech 2015, taking place September 15-17 at America’s Center Convention Complex in St. Louis, Missouri. Malco will begin exhibiting at both #582 on Wednesday, September 16 and will be at their booth from 12:30-4:30 pm. On Thursday, September 17, Malco […]

READ MORE...

Made in USA

7th May 2015 • Categories: Autobody Tools, Construction, Made in USA, Product Introductions, Products

Presented here are some jottings and discussion threads intended to generate sharing of thoughts and feedback on the meaning and merits of “Made in USA” for you.  Please be civil so that all may be heard.  What does the term Made in USA Mean? The Federal Trade Commission (FTC), in brief, defines use of the […]

READ MORE...

Socket-Drive TORX Bit Kit

5th March 2015 • Categories: Connext-Handles, Construction, HVAC, New Product, Product Introductions, Products

ALL THE RIGHT CONNECTIONS  Paired with a Versatile CONNEXT3™ Quick-Connect Ratcheting Handle TXSK1 KIT CONTENTS 12 Socket Drive Torx Bits 3 Hex Drive Adapters for 1/4, 3/8 & 1/2 in Square Drives CONNEXT3™ Ratcheting Handle with 1/4 in Holder Durable Polymer Case   NOTE: Not for use with impact drivers. Sure, you can use other […]

READ MORE...

Easy on the checkbook and quick on the install!

3rd February 2015 • Categories: Construction, HVAC, New Product

Flexible Fiberglass  Duct is a popular choice for residential and commercial heating and cooling.  The flexible duct is often prone to kinks and sags that will restrict your air flow.  Malco has again come up with the perfect solution. Our FDS1 Flexible Duct Support will both eliminate air flow restrictions and increase efficiency. By doing […]

READ MORE...

They deliver BIG on the job

5th January 2015 • Categories: Construction, New Product

                With an overall length of only 7-1/8 inches (181 mm), the AVsMini easily goes to work where full-size aviation snips are challenged.  Forged steel jaws produce a long lasting, sharply defined cutting edge.  A 3/4 inch (19 mm) length of cut and sure-gripping serrations on the lower […]

READ MORE...

“PAN STYLE” MINI-BRAKE

9th December 2014 • Categories: Construction, Metal Bending, Mini Brake, New Product, Product Introductions, Products

GOES WHEREVER YOU NEED IT TO Fabricate drip pans, register boxes, and complex angled corners for flashing and fascia, right there on the job!   At just under 100 pounds (45 kg), if you remove just two screws, you can separate the Malco MB48B “Pan Style” Mini-Brake Anvil and frame to easily move it around the […]

READ MORE...

Ratchet up Efficiency!

6th November 2014 • Categories: Chain Link Fence, Fencing Tools, New Product

Offset Ratcheting Box Wrench is Ideal for installing or removing fasteners at chain link fence hook-up points. SMALL, LIGHTWEIGHT AND HUGELY PRODUCTIVE This versatile OFFSET RATCHETING BOX WRENCH provides easy fastener access and fast, two-way ratcheting  action with an effortless handle-swing motion.  Finger switches are easily accessible to change ratcheting direction.  A 25 degree offset […]

READ MORE...

TurboShear and TurboXTool Attachments

9th October 2014 • Categories: Asphalt Roofing Rools, Backerboard, Construction, Fiber Cement, Product Introductions, Products, TurboXTools, Uncategorized, Vinyl Siding

NOW EVEN MORE USER-DRILL FRIENDLY! Versatile NEW 1/4 inch Hex Drive Shafts Fit A Broader Range of Drills including Quick Release Impact Drivers Malco TurboShear and TurboXTool Drill Attachments  are now even more user-drill-friendly with the introduction of a new hex shank drive shaft that fits a broad range of 1/4 to 1/2 inch (6.35-12.7mm) […]

READ MORE...

Hem Quarter Panel Flanges

11th September 2014 • Categories: Autobody Tools, New Product, Products, TurboXTools

80% FASTER, 100% SMARTER Bend and close wheel arc flanges of replacement quarter panels the easy way with a specialized power-assisted TurboXTool from Malco Products.  Use the TurboXTool Quarter Panel Hemming Attachment QHT1, with a cordless drill or ¼ in. impact driver for maximum portability and convenience anywhere on the job.  Or choose the compact […]

READ MORE...

New Vinyl-Cutting TurboShears

8th August 2014 • Categories: Construction, New Product, Turbo Shears, Uncategorized

POWER YOUR WAY – THROUGH LOCK-SEAMS AND PROFILES Power-assisted Vinyl-Cutting TurboShears, from Malco Products, provide an easy scissor action for making fast straight cuts, circles and squares in all popular vinyl siding styles.  Use the TurboShear Attachment TSV1, with a minimum 1/4 inch (6.35 mm) cordless drill or impact driver for maximum portability and convenience […]

READ MORE...

FAST SmartTool and SmartClip System is a SMART Choice!

10th July 2014 • Categories: Construction, New Product, Pex to Wire Radiant Heat Tools, Product Introductions

A FASTER, SMARTER way to attach PEX to a wire grid and foamboard base.                                      Based on actual field trials, the SmartTool and SmartClip stapling system is 80% faster than hand tool or hand tying methods.  You might […]

READ MORE...

UNIQUE FEATURED

9th June 2014 • Categories: Autobody Tools, New Product, Uncategorized

  SCREW EXTRACTOR KIT With age and wear, any threaded fastener head used in auto body applications has the potential to corrode, break off or strip out, creating an extraction issue if removal of the secured part is required to make a repair.  Parts removal that can pose a fastener extraction issue include: aftermarket parts, […]

READ MORE...

THE BIG EASY

14th May 2014 • Categories: Construction, Product Introductions

The Malco Channel Shear for drywall metal stud and runner is EASY LOADING, EASY CUTTING, EASY TO CARRY and STORE, and now EASY ON THE BUDGET! The Malco Channel Shear Model SRC24A cuts completely through a drywall metal stud or runner in one easy stroke without deforming the channel shape. A unique die assembly surrounds […]

READ MORE...

A complete spot weld removal solution!

16th April 2014 • Categories: Autobody Tools, New Product, Products, Uncategorized

The Spot Weld Removal Kit from Malco Products consists of 8 pieces: 1) 3/8-in. Cutter Assembly; 5) Replacement Cutter Bits; 1) Replacement Center Drill; and 1) 5/16-in. Cobalt Drill. The Cutter Assembly includes a double-ended bit, centering drill and non-slip hex shank.  The long-life bit easily threads onto the hex shank and is quickly reversible.  […]

READ MORE...

FOLDING A METAL ROOFING EDGE IS NOW TWICE AS EASY

12th March 2014 • Categories: New Product

The Malco Drip Edge Folding Tool is available in two lengths with two folding seam depths for making quick and easy bends along the drip edge of standing seam metal roofing! A new 18-inch (46 cm) long Model DEFT1 and improved 24-inch (61 mm) Model DEFT combine to match up with most flat pan standing […]

READ MORE...

Reduce Metal Fabrication Time For No-Bump lap Welds by Half

19th February 2014 • Categories: Autobody Tools, New Product

One tool punches a 5/16-in (8 mm) hole and forms a 7/16-inch x .040-inch flange in autobody panels! This versatile tool design makes both holes and flanges in 22 to 16 gauge (0.76 to 1.52 mm) automotive grade, mild steel.  Use one side of the tool head to punch a clean, flat, burr-free 5/16 in […]

READ MORE...

Malco TurboShear 16-Gauge Steel Capacity

14th January 2014 • Categories: Autobody Tools, Turbo Shears

When You Need It, You Really Need It! FOR WHAT YOU NEED WHEN YOU NEED IT: APPLICATIONS Malco 16-Gauge Capacity Metal-Cutting TurboShears are rated for cutting steel sheets and profiles encountered on construction sites and in garages including metal building construction and industrial HVAC installations or autobody restoration, custom builds and repairs.  Applications include building […]

READ MORE...

Cutting Corrugated or Box Pattern Metal Roofing?

11th November 2013 • Categories: New Product, Turbo Shears

We’ve Got a Nifty New Angle on Cutting Metal Roofing Panels! The Malco TSCM TurboShear Drill Attachment makes easy cross cuts, fast lengthwise cuts, even circular and square outlets in large or small pattern corrugated metal roofing and most trapezoidal (box) pattern metal roofing panels. Elongated blades with compact jaws create a steep 75-degree offset […]

READ MORE...

Malco TurboXTools For Removing Damaged AutoDoor Skins

7th October 2013 • Categories: Autobody Tools, Turbo Shears, Uncategorized

More Than  One Way To Skin A Door! No more dust, dirt or sparks from time consuming grinding.  And no risk of burn marks on door frames.  These TurboXTools cut damaged skins off doors of passenger vehicles and light trucks fast and easy! A narrow working head, with spacer guide, cuts through the rounded edge […]

READ MORE...

MALCO 2013 BE A STAR BLOG CONTEST:

19th September 2013 • Categories: Autobody Tools, New Product, Product Introductions, Products, Turbo Shears, Want to be a Star

Congratulations to our TurboShear Testimonial Winners, Jonathan Diehl and Evan Gehman! Thank you Jonathan and Evan for your winning testimonial submissions stating how much you absolutely love and cherish your Malco TurboShear.  How fitting that you should receive another Malco TurboShear of your choice as an award! Jonathan Diehl wrote a testimonial for the “Original” […]

READ MORE...

SLATE ROOFING TOOL ESSENTIALS

1st May 2013 • Categories: New Product, Slate Cutting Tools

There are other solutions, but none so handy to use as the new slate cutter & slate punch from Malco! The lightweight and portable Malco NSP1 Hand Punch goes anywhere on the job site to punch a clean, recessed nail hole in 4 – 8 mm natural roofing slate. A big 2-1/2-inch (63 mm) throat […]

READ MORE...

Malco Outlet Punches & Saws

25th February 2013 • Categories: Gutter Outlet Tools, New Product

A Complete System for Cutting Downspout Drop Holes! RATCHETING TOOL AND PUNCH SOLUTION FOR POPULAR K-STYLE ALUMINUM GUTTER: A versatile, lightweight Malco Tool Frame accepts your choice of separate Rectangular and X-Style Punch and Die combinations: 2.2 x 3.2 in (56 x 81 mm); 2 x 3 in (51 x 76 mm); 3 x 4 […]

READ MORE...

Santa’s Writers Workshop Wrap-Up

21st January 2013 • Categories: Santa's Writers Workshop, Uncategorized

Malco would like to thank all who participated in our “Santa’s Writers Workshop” contest.  The list of winners with their choice of TurboShear are:  Charles Lewicki of Airport West, Victoria Australia-TurboShear HD, Robert Musselman of Washington, IL – TSHD Air (1st submission about Hole Cutters), Robert Musselman of Washington, IL – TSHD Air (2nd submission […]

READ MORE...

MALCO AVs VERTICAL SNIPS

7th September 2012 • Categories: AV Vertical Snips, New Product, Product Introductions

Easy Gripping in Tight Spaces and Overhead The jaws of these sleek, compact and lightweight aviation snips are set at a 90-degree angle to the handles for easy upright gripping when cutting in confined spaces or overhead.  The user can follow circular or rectangular pattern cuts with either a pushing or pulling motion.  A serrated […]

READ MORE...

THE MALCO QUALITY SOLUTION FOR CRIMPING BOTH LARGE AND SMALL DUCT FASTER AND EASIER BY HAVING DRILL POWER DO ALL THE WORK!

6th June 2012 • Categories: Crimpers

The Malco Turbo-X-Tools-CR Crimping Drill Attachment makes faster, easier, more precise, air-tight crimps in 24 to 30-gauge (0.71 to 0.41 mm) galvanized round duct, spiral duct, ultra-light aluminum duct and hardened (0.61 – 0.31 mm) black stove pipe. Just insert the drive shaft of our power-assisted Crimper attachment into the chuck of your cordless drill. […]

READ MORE...

LEGENDARY FENCING PLIERS

15th March 2012 • Categories: Fencing Tools
READ MORE...

VERSATILE PEX STAPLER FOR WOOD OR FOAMBOARD

19th January 2012 • Categories: Pex to Wood Stapler, Product Introductions

One-Stroke, Magazine Fed Stapling Action for Securing a PEX Layout  used with In-Floor Radiant heating Installations. This non-jamming, magazine-fed stapler operates from a standing position to secure a layout of PEX (polyethylene cross-linked tubing) to a wooden sub-floor or base of foamboard.  A solid, non-stick, one-piece polymer magazine slide directs tool weight over the stapler […]

READ MORE...

EVER LOSE A TOOL? DO YOU WISH YOU COULD MAKE A TOOL STANDOUT AS ALL YOUR OWN?

12th October 2011 • Categories: Customization, Personalization, Product Introductions

Check out our personalized tools to show your personality! Malco offers personalization with a choice of 16 graphics that can be added with your name. Whether laser etched onto the tools or by a label, there will be no question whose tools stand out on the job site. Give them as a gift, or as […]

READ MORE...

“CONNEXT” KITS – BE THE FIRST AT THE JOBSITE TO HAVE ONE!

18th August 2011 • Categories: Connext-Handles, New Product

Have you tried out the new Malco CONNEXT tools yet? Malco CONNEXT Handles with full grip ratcheting style, Magnetic Hex or Hollow Hex Chuck Drivers are now available in CONNEXT Kits.  The tough Cordura Pouch has both a belt clip and a Velcro closure for easy accessibility. Check out all the kits available to fit […]

READ MORE...

Redesigned TurboShear Drill Attachments

3rd June 2011 • Categories: Product Introductions, Turbo Shears

You spoke, we listened The new design makes your power drill into a versatile power shear.  Malco TurboShears attach to virtually any 14.4V or larger corded or cordless drill. The redesign includes sleek, new lightweight, aluminum heads combined with a compact telescoping drill clamp to offer balanced, one-hand control.  The drill clamp adjusts for both […]

READ MORE...

SMALL, LIGHTWEIGHT, MANEUVERABLE IMPACT DRIVER

31st March 2011 • Categories: Mighty Right Angle Driver, New Product

The “Mighty-Right”, right angle impact driver from Malco Products, is ideal for driving or removing sheet metal screws in tight spaces and blind spots. Use the 7.2 V (1.5 Ah) Mighty-Right to drive or remove self-drilling sheet metal screws in tight spaces and blind spots encountered when installing metal duct runs, including access into small […]

READ MORE...

FAST INSTALLATION OF 9-GAUGE HOG RINGS ON CHAIN LINK

25th January 2011 • Categories: Chain Link Fence, New Product, Product Introductions

Commercial grade Hog Ring Pliers with Magazine installs 9-Ga. (3.8 mm) collated aluminum rings or exclusive 9-Ga. (3.8 mm) collated steel rings. Easily secures 7-Ga. (4.5 mm) wire to 9-Ga. (3.8 mm) chain link fence. One of the features of the HRP5 is an auto-feed magazine that ensures uninterrupted operation.  The Malco 9-Gauge (3.8mm) Collated […]

READ MORE...

Attention Roofing Pros. Coming Soon to a Distributor near You.

15th December 2010 • Categories: New Product, Product Introductions, Slate Cutting Tools

ROCK SOLID TURBOSHEAR PERFORMANCE Now make your power drill a slate-cutting power shear! The Malco TurboShear Model TSNS1 attaches to a corded or cordless electric drill for making straight, angled or curved cuts in 4 to 8 mm natural roofing slate fast and easy.  Get superior results with less waste!  An operating speed of 1400 […]

READ MORE...

Two Easy Solutions for Cutting Fiber Cement Not an Easy Choice?

30th September 2010 • Categories: Fiber Cement Guillotines, Product Introductions

Guillotines Generate Minimal Dust! A guillotine-style Angle Cutter and dedicated straight-cutting Guillotine Shear offer a choice of two quiet-quality solutions for cutting fiber cement siding planks while generating minimal dust.  And both of these easy-operating manual shears make efficient, ultra-clean, precise cuts without compressing the 5/16” (8 mm) trim edge of the plank. For making […]

READ MORE...

Custom Kits for Contractors and Trade Schools!

13th August 2010 • Categories: Customization, New Product

Pre-set, off-the-shelf tool kits are not always the answer when it comes to unique job site needs or classroom instructional needs for students. Regardless of how many kit choices a supplier may offer, it is difficult to anticipate the kitted mix of tools that is most right for your application. A Malco

READ MORE...

19th July 2010 • Categories: Hole Cutters, New Product

Now even more choices for producing the most common pipe and vent outlets! Whatever your preference is for outlet hole sizes to vent common furnace or dryer pipe diameters, Malco has it covered with the addition of 3 NEW CARBIDE TIPPED HOLE SAWS (2-9/16

READ MORE...

LABOR-SAVING VINYL FENCING TOOLS!

13th April 2010 • Categories: New Product, Vinyl Fence Tools

Trim, Notch and Repair Malco

READ MORE...

Malco GOLD STANDARD Hole Cutters handle up 20-gauge steel!

10th November 2009 • Categories: Hole Cutters, New Product, Product Introductions

Distinctive gold Cutter Bits, gold Bearings and a gold Pivot Pin are visual assurance that you have purchased the longest lasting, fastest cutting, easiest adjusting hole-cutting solution for sheet metal applications. With a 20-gauge capacity in galvanized steel (1.02mm) or mild steel (0.91mm), Malco Hole Cutters are ideal for making large or small diameter take-offs […]

READ MORE...

CRIMPING ROUND DUCTWORK, VENT AND STOVE PIPE

2nd October 2009 • Categories: Crimpers, Products

Are We Crimping Your Style? Malco

READ MORE...

Malco Products Redline Video – Make comments here

2nd October 2009 • Categories: New Product, Product Introductions, Products, Uncategorized

Redline Handles Video – Click here

READ MORE...

Malco TurboShear Family Video – make comments here

9th September 2009 • Categories: New Product, Product Introductions, Products, Turbo Shears

Click here to view the Malco TurboShear Family Video

READ MORE...

Redline Video Comments Here

1st July 2009 • Categories: New Product, Product Introductions, Products

Redline Video Link (Please click here)

READ MORE...

REDLINE HANDLES BY MALCO

1st July 2009 • Categories: New Product, Product Introductions, Products

Tired of hand tools that give your hands a workout? The addition of New REDLINE HANDLES to 22 essential Malco

READ MORE...