Made in USA

7th May 2015 • Categories: Autobody Tools, Construction, Made in USA, Product Introductions, Products

Presented here are some jottings and discussion threads intended to generate sharing of thoughts and feedback on the meaning and merits of “Made in USA” for you.  Please be civil so that all may be heard.  What does the term Made in USA Mean? The Federal Trade Commission (FTC), in brief, defines use of the […]

READ MORE...

They deliver BIG on the job

5th January 2015 • Categories: Construction, New Product

                With an overall length of only 7-1/8 inches (181 mm), the AVsMini easily goes to work where full-size aviation snips are challenged.  Forged steel jaws produce a long lasting, sharply defined cutting edge.  A 3/4 inch (19 mm) length of cut and sure-gripping serrations on the lower […]

READ MORE...

TurboShear and TurboXTool Attachments

9th October 2014 • Categories: Asphalt Roofing Rools, Backerboard, Construction, Fiber Cement, Product Introductions, Products, TurboXTools, Uncategorized, Vinyl Siding

NOW EVEN MORE USER-DRILL FRIENDLY! Versatile NEW 1/4 inch Hex Drive Shafts Fit A Broader Range of Drills including Quick Release Impact Drivers Malco TurboShear and TurboXTool Drill Attachments  are now even more user-drill-friendly with the introduction of a new hex shank drive shaft that fits a broad range of 1/4 to 1/2 inch (6.35-12.7mm) […]

READ MORE...

THE BIG EASY

14th May 2014 • Categories: Construction, Product Introductions

The Malco Channel Shear for drywall metal stud and runner is EASY LOADING, EASY CUTTING, EASY TO CARRY and STORE, and now EASY ON THE BUDGET! The Malco Channel Shear Model SRC24A cuts completely through a drywall metal stud or runner in one easy stroke without deforming the channel shape. A unique die assembly surrounds […]

READ MORE...

FOLDING A METAL ROOFING EDGE IS NOW TWICE AS EASY

12th March 2014 • Categories: New Product

The Malco Drip Edge Folding Tool is available in two lengths with two folding seam depths for making quick and easy bends along the drip edge of standing seam metal roofing! A new 18-inch (46 cm) long Model DEFT1 and improved 24-inch (61 mm) Model DEFT combine to match up with most flat pan standing […]

READ MORE...

Malco TurboShear 16-Gauge Steel Capacity

14th January 2014 • Categories: Autobody Tools, Turbo Shears

When You Need It, You Really Need It! FOR WHAT YOU NEED WHEN YOU NEED IT: APPLICATIONS Malco 16-Gauge Capacity Metal-Cutting TurboShears are rated for cutting steel sheets and profiles encountered on construction sites and in garages including metal building construction and industrial HVAC installations or autobody restoration, custom builds and repairs.  Applications include building […]

READ MORE...

Cutting Corrugated or Box Pattern Metal Roofing?

11th November 2013 • Categories: New Product, Turbo Shears

We’ve Got a Nifty New Angle on Cutting Metal Roofing Panels! The Malco TSCM TurboShear Drill Attachment makes easy cross cuts, fast lengthwise cuts, even circular and square outlets in large or small pattern corrugated metal roofing and most trapezoidal (box) pattern metal roofing panels. Elongated blades with compact jaws create a steep 75-degree offset […]

READ MORE...

MALCO 2013 BE A STAR BLOG CONTEST:

19th September 2013 • Categories: Autobody Tools, New Product, Product Introductions, Products, Turbo Shears, Want to be a Star

Congratulations to our TurboShear Testimonial Winners, Jonathan Diehl and Evan Gehman! Thank you Jonathan and Evan for your winning testimonial submissions stating how much you absolutely love and cherish your Malco TurboShear.  How fitting that you should receive another Malco TurboShear of your choice as an award! Jonathan Diehl wrote a testimonial for the “Original” […]

READ MORE...

Malco Outlet Punches & Saws

25th February 2013 • Categories: Gutter Outlet Tools, New Product

A Complete System for Cutting Downspout Drop Holes! RATCHETING TOOL AND PUNCH SOLUTION FOR POPULAR K-STYLE ALUMINUM GUTTER: A versatile, lightweight Malco Tool Frame accepts your choice of separate Rectangular and X-Style Punch and Die combinations: 2.2 x 3.2 in (56 x 81 mm); 2 x 3 in (51 x 76 mm); 3 x 4 […]

READ MORE...

EVER LOSE A TOOL? DO YOU WISH YOU COULD MAKE A TOOL STANDOUT AS ALL YOUR OWN?

12th October 2011 • Categories: Customization, Personalization, Product Introductions

Check out our personalized tools to show your personality! Malco offers personalization with a choice of 16 graphics that can be added with your name. Whether laser etched onto the tools or by a label, there will be no question whose tools stand out on the job site. Give them as a gift, or as […]

READ MORE...

Two Easy Solutions for Cutting Fiber Cement Not an Easy Choice?

30th September 2010 • Categories: Fiber Cement Guillotines, Product Introductions

Guillotines Generate Minimal Dust! A guillotine-style Angle Cutter and dedicated straight-cutting Guillotine Shear offer a choice of two quiet-quality solutions for cutting fiber cement siding planks while generating minimal dust.  And both of these easy-operating manual shears make efficient, ultra-clean, precise cuts without compressing the 5/16” (8 mm) trim edge of the plank. For making […]

READ MORE...

Custom Kits for Contractors and Trade Schools!

13th August 2010 • Categories: Customization, New Product

Pre-set, off-the-shelf tool kits are not always the answer when it comes to unique job site needs or classroom instructional needs for students. Regardless of how many kit choices a supplier may offer, it is difficult to anticipate the kitted mix of tools that is most right for your application. A Malco

READ MORE...

19th July 2010 • Categories: Hole Cutters, New Product

Now even more choices for producing the most common pipe and vent outlets! Whatever your preference is for outlet hole sizes to vent common furnace or dryer pipe diameters, Malco has it covered with the addition of 3 NEW CARBIDE TIPPED HOLE SAWS (2-9/16

READ MORE...

Malco GOLD STANDARD Hole Cutters handle up 20-gauge steel!

10th November 2009 • Categories: Hole Cutters, New Product, Product Introductions

Distinctive gold Cutter Bits, gold Bearings and a gold Pivot Pin are visual assurance that you have purchased the longest lasting, fastest cutting, easiest adjusting hole-cutting solution for sheet metal applications. With a 20-gauge capacity in galvanized steel (1.02mm) or mild steel (0.91mm), Malco Hole Cutters are ideal for making large or small diameter take-offs […]

READ MORE...

Malco Products Redline Video – Make comments here

2nd October 2009 • Categories: New Product, Product Introductions, Products, Uncategorized

Redline Handles Video – Click here

READ MORE...

Malco TurboShear Family Video – make comments here

9th September 2009 • Categories: New Product, Product Introductions, Products, Turbo Shears

Click here to view the Malco TurboShear Family Video

READ MORE...

Malco TurboShear AIR POWER for both job site and shop applications!

9th September 2009 • Categories: New Product, Product Introductions, Products, Turbo Shears

High speed pneumatic TurboShear models are available for all current TurboShear cutting applications and bring an added dimension to the versatile TurboShear product family. Now there are pneumatic TurboShears for cutting sheet metal, asphalt shingles, fiber cement siding and backerboard. Air-powered TurboShear models offer characteristic premium performance without the premium price. You will find them […]

READ MORE...

Turbo Shear Heavy Duty Video Comments Here

1st June 2009 • Categories: New Product, Products, Turbo Shears

Turbo Shear Heavy Duty Video(click here)

READ MORE...