Cutting Corrugated or Box Pattern Metal Roofing?

11th November 2013 • Categories: New Product, Turbo Shears

We’ve Got a Nifty New Angle on Cutting Metal Roofing Panels! The Malco TSCM TurboShear Drill Attachment makes easy cross cuts, fast lengthwise cuts, even circular and square outlets in large or small pattern corrugated metal roofing and most trapezoidal (box) pattern metal roofing panels. Elongated blades with compact jaws create a steep 75-degree offset […]

READ MORE...

Malco TurboXTools For Removing Damaged AutoDoor Skins

7th October 2013 • Categories: Autobody Tools, Turbo Shears, Uncategorized

More Than  One Way To Skin A Door! No more dust, dirt or sparks from time consuming grinding.  And no risk of burn marks on door frames.  These TurboXTools cut damaged skins off doors of passenger vehicles and light trucks fast and easy! A narrow working head, with spacer guide, cuts through the rounded edge […]

READ MORE...

SLATE ROOFING TOOL ESSENTIALS

1st May 2013 • Categories: New Product, Slate Cutting Tools

There are other solutions, but none so handy to use as the new slate cutter & slate punch from Malco! The lightweight and portable Malco NSP1 Hand Punch goes anywhere on the job site to punch a clean, recessed nail hole in 4 – 8 mm natural roofing slate. A big 2-1/2-inch (63 mm) throat […]

READ MORE...

Air-Actuated Solution For Controlled Dent Removal For Both The Specialist And Push-To-Paint Repair Tech

5th April 2013 • Categories: Autobody Tools, New Product, Rapid Dent Removal

QUIET POWER Malco Products RDR Rapid Dent Removal Air Tool Malco’s innovative Rapid Dent Removal System, “RADiTAP”, compliments the skills of both the paintless dent removal specialist and the collision repair technician. Both disciplines stand to lower costs with this dent removal system and add to the bottom line via time savings and reduced material, […]

READ MORE...

Malco Outlet Punches & Saws

25th February 2013 • Categories: Gutter Outlet Tools, New Product

A Complete System for Cutting Downspout Drop Holes! RATCHETING TOOL AND PUNCH SOLUTION FOR POPULAR K-STYLE ALUMINUM GUTTER: A versatile, lightweight Malco Tool Frame accepts your choice of separate Rectangular and X-Style Punch and Die combinations: 2.2 x 3.2 in (56 x 81 mm); 2 x 3 in (51 x 76 mm); 3 x 4 […]

READ MORE...

MALCO AVs VERTICAL SNIPS

7th September 2012 • Categories: AV Vertical Snips, New Product, Product Introductions

Easy Gripping in Tight Spaces and Overhead The jaws of these sleek, compact and lightweight aviation snips are set at a 90-degree angle to the handles for easy upright gripping when cutting in confined spaces or overhead.  The user can follow circular or rectangular pattern cuts with either a pushing or pulling motion.  A serrated […]

READ MORE...

FAST INSTALLATION OF 9-GAUGE HOG RINGS ON CHAIN LINK

25th January 2011 • Categories: Chain Link Fence, New Product, Product Introductions

Commercial grade Hog Ring Pliers with Magazine installs 9-Ga. (3.8 mm) collated aluminum rings or exclusive 9-Ga. (3.8 mm) collated steel rings. Easily secures 7-Ga. (4.5 mm) wire to 9-Ga. (3.8 mm) chain link fence. One of the features of the HRP5 is an auto-feed magazine that ensures uninterrupted operation.  The Malco 9-Gauge (3.8mm) Collated […]

READ MORE...

Attention Roofing Pros. Coming Soon to a Distributor near You.

15th December 2010 • Categories: New Product, Product Introductions, Slate Cutting Tools

ROCK SOLID TURBOSHEAR PERFORMANCE Now make your power drill a slate-cutting power shear! The Malco TurboShear Model TSNS1 attaches to a corded or cordless electric drill for making straight, angled or curved cuts in 4 to 8 mm natural roofing slate fast and easy.  Get superior results with less waste!  An operating speed of 1400 […]

READ MORE...

The reasons are EASY TO GRASP why pros prefer MAX!

16th March 2010 • Categories: Max Snips, New Product

NEW NARROWER GRIP OPENINGS OF ALL MALCO MAX2000 AVIATION SNIPS fit large or small hands without sacrificing length of cut! ALL-NEW, EXCLUSIVE MAX2000 DOUBLE CUT SNIP DESIGN sets an all-new standard for performance! NEW LATCHES ON ALL MAX2000 SNIPS will not loosen or hang up! Malco Max2000 Aviation Snips now feature all-new, molded thermoplastic gripped […]

READ MORE...

Malco GOLD STANDARD Hole Cutters handle up 20-gauge steel!

10th November 2009 • Categories: Hole Cutters, New Product, Product Introductions

Distinctive gold Cutter Bits, gold Bearings and a gold Pivot Pin are visual assurance that you have purchased the longest lasting, fastest cutting, easiest adjusting hole-cutting solution for sheet metal applications. With a 20-gauge capacity in galvanized steel (1.02mm) or mild steel (0.91mm), Malco Hole Cutters are ideal for making large or small diameter take-offs […]

READ MORE...