Life Can Be Lonely For an HVAC Technician

23rd June 2015 • Categories: HVAC

It’s a huge misconception that joining the force of HVAC technicians is a risky proposition right now. The reality is that in HVAC the old adage that, “they don’t make them like they used to” is pretty close to the truth. Gone are the days when an air conditioning system was put in place and […]

READ MORE...

Made in USA

7th May 2015 • Categories: Autobody Tools, Construction, Made in USA, Product Introductions, Products

Presented here are some jottings and discussion threads intended to generate sharing of thoughts and feedback on the meaning and merits of “Made in USA” for you.  Please be civil so that all may be heard.  What does the term Made in USA Mean? The Federal Trade Commission (FTC), in brief, defines use of the […]

READ MORE...

Socket-Drive TORX Bit Kit

5th March 2015 • Categories: Connext-Handles, Construction, HVAC, New Product, Product Introductions, Products

ALL THE RIGHT CONNECTIONS  Paired with a Versatile CONNEXT3™ Quick-Connect Ratcheting Handle TXSK1 KIT CONTENTS 12 Socket Drive Torx Bits 3 Hex Drive Adapters for 1/4, 3/8 & 1/2 in Square Drives CONNEXT3™ Ratcheting Handle with 1/4 in Holder Durable Polymer Case   NOTE: Not for use with impact drivers. Sure, you can use other […]

READ MORE...

Easy on the checkbook and quick on the install!

3rd February 2015 • Categories: Construction, HVAC, New Product

Flexible Fiberglass  Duct is a popular choice for residential and commercial heating and cooling.  The flexible duct is often prone to kinks and sags that will restrict your air flow.  Malco has again come up with the perfect solution. Our FDS1 Flexible Duct Support will both eliminate air flow restrictions and increase efficiency. By doing […]

READ MORE...

They deliver BIG on the job

5th January 2015 • Categories: Construction, New Product

                With an overall length of only 7-1/8 inches (181 mm), the AVsMini easily goes to work where full-size aviation snips are challenged.  Forged steel jaws produce a long lasting, sharply defined cutting edge.  A 3/4 inch (19 mm) length of cut and sure-gripping serrations on the lower […]

READ MORE...

“PAN STYLE” MINI-BRAKE

9th December 2014 • Categories: Construction, Metal Bending, Mini Brake, New Product, Product Introductions, Products

GOES WHEREVER YOU NEED IT TO Fabricate drip pans, register boxes, and complex angled corners for flashing and fascia, right there on the job!   At just under 100 pounds (45 kg), if you remove just two screws, you can separate the Malco MB48B “Pan Style” Mini-Brake Anvil and frame to easily move it around the […]

READ MORE...

Ratchet up Efficiency!

6th November 2014 • Categories: Chain Link Fence, Fencing Tools, New Product

Offset Ratcheting Box Wrench is Ideal for installing or removing fasteners at chain link fence hook-up points. SMALL, LIGHTWEIGHT AND HUGELY PRODUCTIVE This versatile OFFSET RATCHETING BOX WRENCH provides easy fastener access and fast, two-way ratcheting  action with an effortless handle-swing motion.  Finger switches are easily accessible to change ratcheting direction.  A 25 degree offset […]

READ MORE...

TurboShear and TurboXTool Attachments

9th October 2014 • Categories: Asphalt Roofing Rools, Backerboard, Construction, Fiber Cement, Product Introductions, Products, TurboXTools, Uncategorized, Vinyl Siding

NOW EVEN MORE USER-DRILL FRIENDLY! Versatile NEW 1/4 inch Hex Drive Shafts Fit A Broader Range of Drills including Quick Release Impact Drivers Malco TurboShear and TurboXTool Drill Attachments  are now even more user-drill-friendly with the introduction of a new hex shank drive shaft that fits a broad range of 1/4 to 1/2 inch (6.35-12.7mm) […]

READ MORE...

Hem Quarter Panel Flanges

11th September 2014 • Categories: Autobody Tools, New Product, Products, TurboXTools

80% FASTER, 100% SMARTER Bend and close wheel arc flanges of replacement quarter panels the easy way with a specialized power-assisted TurboXTool from Malco Products.  Use the TurboXTool Quarter Panel Hemming Attachment QHT1, with a cordless drill or ¼ in. impact driver for maximum portability and convenience anywhere on the job.  Or choose the compact […]

READ MORE...

New Vinyl-Cutting TurboShears

8th August 2014 • Categories: Construction, New Product, Turbo Shears, Uncategorized

POWER YOUR WAY – THROUGH LOCK-SEAMS AND PROFILES Power-assisted Vinyl-Cutting TurboShears, from Malco Products, provide an easy scissor action for making fast straight cuts, circles and squares in all popular vinyl siding styles.  Use the TurboShear Attachment TSV1, with a minimum 1/4 inch (6.35 mm) cordless drill or impact driver for maximum portability and convenience […]

READ MORE...