Made in USA

7th May 2015 • Categories: Autobody Tools, Construction, Made in USA, Product Introductions, Products

Presented here are some jottings and discussion threads intended to generate sharing of thoughts and feedback on the meaning and merits of “Made in USA” for you.  Please be civil so that all may be heard.  What does the term Made in USA Mean? The Federal Trade Commission (FTC), in brief, defines use of the […]

READ MORE...

Socket-Drive TORX Bit Kit

5th March 2015 • Categories: Connext-Handles, Construction, HVAC, New Product, Product Introductions, Products

ALL THE RIGHT CONNECTIONS  Paired with a Versatile CONNEXT3™ Quick-Connect Ratcheting Handle TXSK1 KIT CONTENTS 12 Socket Drive Torx Bits 3 Hex Drive Adapters for 1/4, 3/8 & 1/2 in Square Drives CONNEXT3™ Ratcheting Handle with 1/4 in Holder Durable Polymer Case   NOTE: Not for use with impact drivers. Sure, you can use other […]

READ MORE...

“PAN STYLE” MINI-BRAKE

9th December 2014 • Categories: Construction, Metal Bending, Mini Brake, New Product, Product Introductions, Products

GOES WHEREVER YOU NEED IT TO Fabricate drip pans, register boxes, and complex angled corners for flashing and fascia, right there on the job!   At just under 100 pounds (45 kg), if you remove just two screws, you can separate the Malco MB48B “Pan Style” Mini-Brake Anvil and frame to easily move it around the […]

READ MORE...

TurboShear and TurboXTool Attachments

9th October 2014 • Categories: Asphalt Roofing Rools, Backerboard, Construction, Fiber Cement, Product Introductions, Products, TurboXTools, Uncategorized, Vinyl Siding

NOW EVEN MORE USER-DRILL FRIENDLY! Versatile NEW 1/4 inch Hex Drive Shafts Fit A Broader Range of Drills including Quick Release Impact Drivers Malco TurboShear and TurboXTool Drill Attachments  are now even more user-drill-friendly with the introduction of a new hex shank drive shaft that fits a broad range of 1/4 to 1/2 inch (6.35-12.7mm) […]

READ MORE...

FAST SmartTool and SmartClip System is a SMART Choice!

10th July 2014 • Categories: Construction, New Product, Pex to Wire Radiant Heat Tools, Product Introductions

A FASTER, SMARTER way to attach PEX to a wire grid and foamboard base.                                      Based on actual field trials, the SmartTool and SmartClip stapling system is 80% faster than hand tool or hand tying methods.  You might […]

READ MORE...

MALCO AVs VERTICAL SNIPS

7th September 2012 • Categories: AV Vertical Snips, New Product, Product Introductions

Easy Gripping in Tight Spaces and Overhead The jaws of these sleek, compact and lightweight aviation snips are set at a 90-degree angle to the handles for easy upright gripping when cutting in confined spaces or overhead.  The user can follow circular or rectangular pattern cuts with either a pushing or pulling motion.  A serrated […]

READ MORE...

FAST INSTALLATION OF 9-GAUGE HOG RINGS ON CHAIN LINK

25th January 2011 • Categories: Chain Link Fence, New Product, Product Introductions

Commercial grade Hog Ring Pliers with Magazine installs 9-Ga. (3.8 mm) collated aluminum rings or exclusive 9-Ga. (3.8 mm) collated steel rings. Easily secures 7-Ga. (4.5 mm) wire to 9-Ga. (3.8 mm) chain link fence. One of the features of the HRP5 is an auto-feed magazine that ensures uninterrupted operation.  The Malco 9-Gauge (3.8mm) Collated […]

READ MORE...

Attention Roofing Pros. Coming Soon to a Distributor near You.

15th December 2010 • Categories: New Product, Product Introductions, Slate Cutting Tools

ROCK SOLID TURBOSHEAR PERFORMANCE Now make your power drill a slate-cutting power shear! The Malco TurboShear Model TSNS1 attaches to a corded or cordless electric drill for making straight, angled or curved cuts in 4 to 8 mm natural roofing slate fast and easy.  Get superior results with less waste!  An operating speed of 1400 […]

READ MORE...

Two Easy Solutions for Cutting Fiber Cement Not an Easy Choice?

30th September 2010 • Categories: Fiber Cement Guillotines, Product Introductions

Guillotines Generate Minimal Dust! A guillotine-style Angle Cutter and dedicated straight-cutting Guillotine Shear offer a choice of two quiet-quality solutions for cutting fiber cement siding planks while generating minimal dust.  And both of these easy-operating manual shears make efficient, ultra-clean, precise cuts without compressing the 5/16” (8 mm) trim edge of the plank. For making […]

READ MORE...

Malco GOLD STANDARD Hole Cutters handle up 20-gauge steel!

10th November 2009 • Categories: Hole Cutters, New Product, Product Introductions

Distinctive gold Cutter Bits, gold Bearings and a gold Pivot Pin are visual assurance that you have purchased the longest lasting, fastest cutting, easiest adjusting hole-cutting solution for sheet metal applications. With a 20-gauge capacity in galvanized steel (1.02mm) or mild steel (0.91mm), Malco Hole Cutters are ideal for making large or small diameter take-offs […]

READ MORE...