Construction | Malco Products, SBC

Top Malco Tools for Trade School Graduates

31st May 2019 • Categories: Autobody Tools, Awards, Construction, HVAC

Are you a spring trade school graduate? Congratulations! Malco applauds you for completing post-secondary schooling to further your professional career. We wish you nothing but the best moving forward. If you are graduating from trade school programs in heating, ventilation, and air conditioning (HVAC), building construction, or autobody repair, check out our top tool suggestions […]

Make Your Life Easier With Malco Hole Cutters and Cutter Bits

27th August 2018 • Categories: Construction, Hole Cutters, HVAC, Made in USA

Any user of hand tools knows that cutting holes in sheet metal can be a pain in the you-know-what. Either you are fumbling around with aviation snips to try and cut the perfect hole on duct metal, or you are carrying around a whole bag of hole saws to cut through sheet metal. As always, […]

Meet Malco in St. Louis for Comfortech 2015

15th September 2015 • Categories: Autobody Tools, Construction, HVAC, Made in USA, Products, Uncategorized

Calling all you convention goers! Malco Products Inc. will be out in full force at Comfortech 2015, taking place September 15-17 at America’s Center Convention Complex in St. Louis, Missouri. Malco will begin exhibiting at both #582 on Wednesday, September 16 and will be at their booth from 12:30-4:30 pm. On Thursday, September 17, Malco […]

Made in USA

7th May 2015 • Categories: Autobody Tools, Construction, Made in USA, Product Introductions, Products

Presented here are some jottings and discussion threads intended to generate sharing of thoughts and feedback on the meaning and merits of “Made in USA” for you. Please be civil so that all may be heard. What does the term Made in USA Mean? The Federal Trade Commission (FTC), in brief, defines use of the […]

Socket-Drive TORX Bit Kit

5th March 2015 • Categories: Connext-Handles, Construction, HVAC, New Product, Product Introductions, Products

ALL THE RIGHT CONNECTIONS Paired with a Versatile CONNEXT3™ Quick-Connect Ratcheting Handle TXSK1 KIT CONTENTS 12 Socket Drive Torx Bits 3 Hex Drive Adapters for 1/4, 3/8 & 1/2 in Square Drives CONNEXT3™ Ratcheting Handle with 1/4 in Holder Durable Polymer Case NOTE: Not for use with impact drivers. Sure, you can use other […]

Easy on the checkbook and quick on the install!

3rd February 2015 • Categories: Construction, HVAC, New Product

Flexible Fiberglass Duct is a popular choice for residential and commercial heating and cooling. The flexible duct is often prone to kinks and sags that will restrict your air flow. Malco has again come up with the perfect solution. Our FDS1 Flexible Duct Support will both eliminate air flow restrictions and increase efficiency. By doing […]

They deliver BIG on the job

5th January 2015 • Categories: Construction, New Product

With an overall length of only 7-1/8 inches (181 mm), the AVsMini easily goes to work where full-size aviation snips are challenged. Forged steel jaws produce a long lasting, sharply defined cutting edge. A 3/4 inch (19 mm) length of cut and sure-gripping serrations on the lower […]

“PAN STYLE” MINI-BRAKE

9th December 2014 • Categories: Construction, Metal Bending, Mini Brake, New Product, Product Introductions, Products

GOES WHEREVER YOU NEED IT TO Fabricate drip pans, register boxes, and complex angled corners for flashing and fascia, right there on the job! At just under 100 pounds (45 kg), if you remove just two screws, you can separate the Malco MB48B “Pan Style” Mini-Brake Anvil and frame to easily move it around the […]

TurboShear and TurboXTool Attachments

9th October 2014 • Categories: Asphalt Roofing Rools, Backerboard, Construction, Fiber Cement, Product Introductions, Products, TurboXTools, Uncategorized, Vinyl Siding

NOW EVEN MORE USER-DRILL FRIENDLY! Versatile NEW 1/4 inch Hex Drive Shafts Fit A Broader Range of Drills including Quick Release Impact Drivers Malco TurboShear and TurboXTool Drill Attachments are now even more user-drill-friendly with the introduction of a new hex shank drive shaft that fits a broad range of 1/4 to 1/2 inch (6.35-12.7mm) […]

New Vinyl-Cutting TurboShears

8th August 2014 • Categories: Construction, New Product, Turbo Shears, Uncategorized

POWER YOUR WAY – THROUGH LOCK-SEAMS AND PROFILES Power-assisted Vinyl-Cutting TurboShears, from Malco Products, provide an easy scissor action for making fast straight cuts, circles and squares in all popular vinyl siding styles. Use the TurboShear Attachment TSV1, with a minimum 1/4 inch (6.35 mm) cordless drill or impact driver for maximum portability and convenience […]

FAST SmartTool and SmartClip System is a SMART Choice!

10th July 2014 • Categories: Construction, New Product, Pex to Wire Radiant Heat Tools, Product Introductions

A FASTER, SMARTER way to attach PEX to a wire grid and foamboard base. Based on actual field trials, the SmartTool and SmartClip stapling system is 80% faster than hand tool or hand tying methods. You might […]

AdvantEDGE

HVAC Sheet Metal Fabrication

Fiberglass Duct Essentials

Gutter Installation Tools

Fiber Cement Siding / Backerboard Essentials

Roofing Essentials

Vinyl Siding Installation Tools

Fence Installation Essentials

Shears, Saws, Snips, and Other Cutting Tools

Fastening Tools and Screws

Tubing Tools

Drywall/Ceiling

Marking & Scribe Tools

Jobsite Essentials

Measuring Tools

Pliers

Automotive Essentials

Tool Bags and Kits

Top Malco Tools for Trade School Graduates

Make Your Life Easier With Malco Hole Cutters and Cutter Bits

Meet Malco in St. Louis for Comfortech 2015

Made in USA

Socket-Drive TORX Bit Kit

Easy on the checkbook and quick on the install!

They deliver BIG on the job

“PAN STYLE” MINI-BRAKE

TurboShear and TurboXTool Attachments

New Vinyl-Cutting TurboShears

FAST SmartTool and SmartClip System is a SMART Choice!

Stay in the know

Have a product idea?

2019 Holidays Observed/Holiday Closing Dates

Product Categories

Stay in the know

Have a product idea?

2019 Holidays Observed/Holiday Closing Dates