You Searched for: fence

Not what you’re looking for? Try searching again.


Chain Link Fence Tools, Tensioning Claws
Fence Tensioning Claws

Chain link fencing claws for easy one person installation.

View

Vinyl Fence Notcher next to two pieces of notched vinyl fence posts
Vinyl Fence Hand Notcher – 1/2″ and 3/4″

Creates 1/2 and 3/4 inch (19.1 mm) wide, 7/8 inch (22.2 mm) deep louver-shaped tabs to lock vinyl pickets and rails in place.

View

Malco Door Hemming Tool Drill Attachment
TurboXTools™ DH Door Hemming Drill Attachment

Drill attachment for hemming replacement skins on doors of passenger vehicles and light trucks.

View

Malco Air Powered Door Hemming Tool
TurboXTools™ DH Door Hemming Air Tool

Air tool for hemming replacement skins on doors of passenger vehicles and light trucks.

View

Malco's FP1 Fencing Pliers
Fencing Pliers

For chain link fence. Legendary all-steel fencing pliers design features three serrated jaw areas, three built-in wire cutter locations and a compact, rounded and tapered nose. 8-in (203 mm) and 10-in (254 mm) sizes.

View

Hog Ring Pliers 9 Gauge, Malco Products
Hog Ring Pliers 9-Gauge

Commercial grade Hog Ring Pliers with Magazine installs 9-Ga. (3.8 mm) collated aluminum rings or exclusive 9-Ga. (3.8 mm) collated steel rings. Easily secures 7-Ga. (4.5 mm) wire to 9-Ga. (3.8 mm) chain link fence.

View

Hog Ring Pliers with Self-Feeding Magazine for 1-3/16″ (30 mm) Rings

The HRP4 Chain Link Fence Stapler works fast to install Malco HR4 (1-3/16″, 30 mm) Hog Ring Staples.

View

Hog Ring Pliers with Self-Feeding Magazine

The HRP2 Chain Link Fence Stapler works fast to install Malco HR2 (3/4″, 20 mm) Hog Ring Staples capable of gripping a combination of 9-gauge (3.8 mm) chain link and 7-gauge (4.6 mm) tensioning wire.

View

Hog Ring Pliers – Compact

HRP1 Chain Link Fence Stapler is compact, lightweight and spring actuated. Compatible with both Malco HR1 (5/8″, 16 mm) and HR2 (3/4″, 20 mm) Hog ring Staples.

View

Hog Ring Staples 9-Gauge

The Malco Hog Ring Staple offering ranges from petite 16-ga. (1.3 mm) and versatile 14-ga. (2 mm) galvanized rings to big 9-ga. (3.8 mm) galvanized. See specification table and diagrams for easy selection.

View

Chain Link Fencing Offset Ratcheting Wrench
Offset Ratcheting Wrench for Fencing

Offset ratcheting wrench with 12-point sockets at each end accommodates 1/2 inch and 9/16 inch hex fasteners.

View

A Malco FCC7 Fiber Cement Siding Cutter in an open position
Fiber Cement Siding Angle Cutter

Use Malco’s FCC7 to cut multiple angles in Fiber Cement Siding with Guillotine Precision and Minimal Dust.

View

Hole Punch – Sheet Metal, Vinyl Plastic

Use for edge hole applications in sheet metal or vinyl plastic including metal ductwork and vinyl window extrusions.

View

Circular Saw Blade: Vinyl Cutting

A full selection of dedicated vinyl-cutting solutions for both Siding and Fencing Pros!

View

1" x 16' Magnetic Tip Tape Measure
Magnetic Measuring Tape

Pick the one tape from a choice of three that is ideal for your metalworking needs!

View

15 Handy Tool Gift Ideas for Dad

Dad. Father. Papa. He goes by different names, but his role never changes. With Father’s Day around the corner, you may be wondering how to express your appreciation for the support he’s given you throughout the years. Malco understands that finding the perfect Father’s Day present can be a tough task, so we’re here to […]

READ MORE...

Celebrating 70 Years of Malco Evolution & Innovation

The new year marks an exciting milestone for Malco as we celebrate our 70th anniversary in business. Throughout time, our company has undergone a metamorphosis, embracing new products, industries, ownership, and much more. To help tell our story, let’s rewind back in time to when it all started. The 1950s began a wave of rapid […]

READ MORE...

Our Top Reasons to be Thankful

With Thanksgiving on the horizon, many of us will be working frantically in the kitchen to prepare delicious dishes to share with loved ones. While we anticipate that epic meal and focus on getting it all done just right, it shouldn’t be the main priority. What’s important is to reminisce on the true meaning of […]

READ MORE...

Must-Have Fencing Contractor Tools

As you probably know, the start of fall means that changing leaves, pumpkins, and bonfires are just around the corner, but it also marks the best time for homeowners to invest in a new professionally installed fence. Spring and summer are typically the busiest times of the year for fencing companies, and since there are […]

READ MORE...

13 Father’s Day Tool Gift Ideas

Malco understands that finding the perfect present for dad can be a difficult task, so we’re here to help. We’ve rounded up a must-have list of 13 useful and quality Father’s Day tool gift ideas that are sure to impress your beloved handyman or trade professional.   Father’s Day Tool Gift Ideas:   6″ C-RHEX […]

READ MORE...

Must Have Innovative Hand Tools | Malco’s Innovation Process

Insight into the Malco Innovation Process Often described as America’s greatest inventor, Thomas A. Edison once said, “There’s a way to do it better – find it.” We couldn’t agree more. Since 1950, Malco has continued our founder’s tradition of lasting quality and continuous innovation, always striving to exceed our customers’ expectations. No one employee […]

READ MORE...

Quality Manufacturing of Hand Tools Makes the Difference

Kids are out of school, temperatures are rising and pools and patios are filling up with revelry. It’s summertime and with all the fun the next couple of months bring, it’s also the busiest time of the year for HVACR, roofing, siding and gutter, and auto body repair technicians. Long days in hot conditions are […]

READ MORE...

The Best Fencing Tools You’ll Want This Summer

“Love they neighbor as yourself; but don’t take down the fence.”—Carl Sandburg Backyard Season is Here – Malco Will Help You Make It Look It’s Best! Don’t look now, but another school year is winding down and another summer is right around the corner. That means it’s time for backyard parties, family barbeques and lounging in […]

READ MORE...

Malco Releases Two New Tools in June

Malco is proud to announce the arrival of two new tools this June to our ever-growing list of product offerings. We’ve released an Expanded Family of Multi-Track Pliers and also Expanded Adjustable Nylon Ties. New Tools to Make Life Easier As always, our new tools are intended to make life easier for workers in HVACR, automotive, […]

READ MORE...

Ratchet up Efficiency!

Offset Ratcheting Box Wrench is Ideal for installing or removing fasteners at chain link fence hook-up points. SMALL, LIGHTWEIGHT AND HUGELY PRODUCTIVE This versatile OFFSET RATCHETING BOX WRENCH provides easy fastener access and fast, two-way ratcheting  action with an effortless handle-swing motion.  Finger switches are easily accessible to change ratcheting direction.  A 25 degree offset […]

READ MORE...

FAST INSTALLATION OF 9-GAUGE HOG RINGS ON CHAIN LINK

Commercial grade Hog Ring Pliers with Magazine installs 9-Ga. (3.8 mm) collated aluminum rings or exclusive 9-Ga. (3.8 mm) collated steel rings. Easily secures 7-Ga. (4.5 mm) wire to 9-Ga. (3.8 mm) chain link fence. One of the features of the HRP5 is an auto-feed magazine that ensures uninterrupted operation.  The Malco 9-Gauge (3.8mm) Collated […]

READ MORE...